Indium incorporation in homoepitaxial β-Ca_2O_3 thin films grown by metal organic vapor phase epitaxy

摘要

Homoepitaxial beta-(In,Ga)(2)O-3 thin films were grown on (100) beta-Ga2O3 substrates by metal organic vapor phase epitaxy using triethylgallium (TEGa) and triethylindium (TEIn). Deposition temperatures from 650 to 825 degrees C and pressures from 5 to 20 mbar have been explored. The growth rate decreased linearly with increasing deposition temperature and decreased exponentially with increasing pressure. The resulting films were characterized by atomic force microscopy (AFM), high resolution x-ray diffraction (HR-XRD), and transmission electron microscopy (TEM). As the flow rate of TEIn varied from 0 to 0.13 mu mol/min during the growth, AFM showed the surface roughness of about 1 nm, while HR-XRD measurements revealed an increase of the vertical lattice spacing. The maximum atomic concentration of indium incorporated in monoclinic beta-(In,Ga)(2)O-3 is about 3.5% and shifts the optical absorption edge to lower energy by similar to 0.18 eV. Further increase of the indium flow rate leads to an increase of the surface roughness and a decrease in the vertical lattice spacing due to the formation of a separate cubic In2O3 phase that was confirmed by HR-TEM images. X-ray reciprocal space maps showed that the beta-(In,Ga)(2)O-3 thin films were grown coherently on beta-Ga2O3. Published under license by AIP Publishing.