首页> 外文期刊>Signal Processing, IEEE Transactions on >A General Criterion for Analog Tx-Rx Beamforming Under OFDM Transmissions
【24h】

A General Criterion for Analog Tx-Rx Beamforming Under OFDM Transmissions

机译:OFDM传输下模拟Tx-Rx波束成形的一般准则

获取原文

摘要

In this paper, we study beamforming schemes for a novel MIMO transceiver, which performs adaptive signal combining in the radio-frequency (RF) domain. Assuming perfect channel knowledge at the receiver side, we consider the problem of designing the transmit and receive RF beamformers under orthogonal frequency division multiplexing (OFDM) transmissions. In particular, a general beamforming criterion is proposed, which depends on a single parameter ¿. This parameter establishes a tradeoff between the energy of the equivalent SISO channel (after Tx-Rx beamforming) and its spectral flatness. The proposed cost function embraces most reasonable criteria for designing analog Tx-Rx beamformers. Hence, for particular values of ¿ the proposed criterion reduces to the minimization of the mean square error (MSE), the maximization of the system capacity, or the maximization of the received signal-to-noise ratio (SNR). In general, the proposed criterion results in a nonconvex optimization problem. However, we show that the problem can be rewritten as a convex cost function subject to a couple of rank-one constraints, and hence it can be approximately solved by semidefinite relaxation (SDR) techniques. Since the computational cost of SDR for this problem is rather high, and building on the observation that the minima of the original problem must be solutions of a pair of coupled eigenvalue problems, we propose yet another simple and efficient gradient search algorithm which, in practice, provides satisfactory solutions with a moderate computational cost. Finally, several numerical examples show the good performance of the proposed technique for both uncoded and 802.11a-coded transmissions.
机译:在本文中,我们研究了一种新型MIMO收发器的波束成形方案,该收发器在射频(RF)域中执行自适应信号组合。假设在接收器端具有完善的信道知识,我们考虑在正交频分复用(OFDM)传输下设计发射和接收RF波束形成器的问题。特别是,提出了一般的波束成形标准,该标准取决于单个参数ƒ。此参数在等效SISO通道的能量(在Tx-Rx波束成形之后)与其频谱平坦度之间建立折衷方案。拟议的成本函数包含设计模拟Tx-Rx波束形成器的最合理标准。因此,对于的特定值,建议的标准减少到均方误差(MSE)的最小值,系统容量的最大值或接收到的信噪比()的最大值。 SNR)。通常,提出的准则会导致非凸优化问题。但是,我们表明,该问题可以重写为受一对秩约束约束的凸成本函数,因此可以通过半定松弛(SDR)技术来近似解决。由于此问题的SDR的计算成本相当高,并且基于观察到原始问题的最小值必须是一对耦合特征值问题的解,因此我们提出了另一种简单有效的梯度搜索算法,该算法在实践中,以适中的计算成本提供了令人满意的解决方案。最后,几个数值示例说明了该技术在未编码和802.11a编码传输中的良好性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号