首页> 外文期刊>Power Electronics, IEEE Transactions on >A New Center-Tapped Half-Bridge Zeta Converter With Small Transformer DC-Offset Current and Low Voltage Stress
【24h】

A New Center-Tapped Half-Bridge Zeta Converter With Small Transformer DC-Offset Current and Low Voltage Stress

机译:具有小变压器直流偏置电流和低压应力的新型中心抽头半桥Zeta转换器

获取原文
获取原文并翻译 | 示例

摘要

In this paper, an asymmetrical half-bridge (AHB) converter employing a new center-tapped zeta rectifier (CTZR) is proposed to achieve a high efficiency in wide-input-voltage and low-output-current applications. Due to the proposed CTZR with high dc conversion ratio and extended maximum duty cycle above 0.5, the transformer turns ratio of the proposed converter can be increased, which decreases the transformer dc-offset current compared with that of the AHB converter. Therefore, its transformer core size is decreased. Moreover, it has a wide zero-voltage-switching range with small transformer leakage inductor, which improves light and medium load efficiency. Furthermore, since it has low voltage stress on the secondary diode, its conduction loss can be reduced. In addition, due to the elimination of a diode, the snubber loss in the secondary side is reduced compared with the AHB converter. Therefore, the proposed converter can achieve a higher efficiency compared with the AHB converter without additional devices. To confirm the operation, features, and validity of the proposed converter, a 250–400 V input and 50 V/250 W output laboratory prototype is built and tested.
机译:本文提出了一种采用新型中心抽头zeta整流器(CTZR)的非对称半桥(AHB)转换器,以在宽输入电压和低输出电流应用中实现高效率。由于建议的CTZR具有较高的直流转换比和超过0.5的最大占空比扩展,因此可以提高建议的转换器的变压器匝数比,与AHB转换器相比,可以降低变压器的直流偏移电流。因此,其变压器铁心尺寸减小。此外,它具有宽的零电压开关范围和较小的变压器漏电感,从而提高了轻载和中等负载效率。此外,由于其在次级二极管上的电压应力较低,因此可以降低其导通损耗。此外,由于消除了二极管,与AHB转换器相比,次级侧的缓冲损耗得以降低。因此,与没有附加设备的AHB转换器相比,提出的转换器可以实现更高的效率。为了确认所提出的转换器的操作,特性和有效性,构建并测试了250-400V输入和50V / 250W输出的实验室原型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号