首页> 外文期刊>Microwave Theory and Techniques, IEEE Transactions on >A Reconfigurable K-/Ka-Band Power Amplifier With High PAE in 0.18- src='/images/tex/241.gif' alt='mu'> m SiGe BiCMOS for Multi-Band Applications
【24h】

A Reconfigurable K-/Ka-Band Power Amplifier With High PAE in 0.18- src='/images/tex/241.gif' alt='mu'> m SiGe BiCMOS for Multi-Band Applications

机译:具有高PAE的可重构K波段/ Ka波段功率放大器,采用0.18- <公式Formulatype =“ inline”> src =“ / images / tex / 241.gif” alt =“ mu”> m SiGe用于多频带应用的BiCMOS

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents a high power efficient broad-band programmable gain amplifier with multi-band switching. The proposed two stage common-emitter amplifier, by using the current reuse topology with a magnetically coupled transformer and a MOS varactor bank as a frequency tunable load, achieves a 55.9% peak power added efficiency (PAE), a peak saturated power of 11.1 dBm, a variable gain from 1.8 to 16 dB, and a tunable large signal 3-dB bandwidth from 24.3 to 35 GHz. The design is fabricated in a commercial 0.18-m SiGe BiCMOS technology and measured with an output 1-dB gain compression point which is better than 9.6 dBm and a maximum dc power consumption of 22.5 mW from a single 1.8 V supply. The core amplifier, excluding the measurement pads, occupies a die area of 500 .
机译:本文提出了一种具有多频段开关功能的高功率高效宽带可编程增益放大器。拟议的两级共发射极放大器,通过将电流重用拓扑与磁耦合变压器和MOS变容二极管组作为频率可调负载一起使用,可实现55.9%的峰值功率附加效率(PAE),峰值饱和功率为11.1 dBm ,1.8至16 dB的可变增益以及24.3至35 GHz的可调大信号3 dB带宽。该设计采用商用0.18-m SiGe BiCMOS技术制造,并在输出1-dB增益压缩点优于9.6dBm的情况下进行了测量,而单1.8V电源的最大直流功耗为22.5mW。除测量焊盘外,核心放大器的裸片面积为500。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号