$^{circ}{rm C}$ and 730 Absorption, Gain, and Threshold in InP/AlGaInP Quantum Dot Laser Diodes
首页> 外文期刊>Quantum Electronics, IEEE Journal of >Absorption, Gain, and Threshold in InP/AlGaInP Quantum Dot Laser Diodes
【24h】

Absorption, Gain, and Threshold in InP/AlGaInP Quantum Dot Laser Diodes

机译:InP / AlGaInP量子点激光二极管的吸收,增益和阈值

获取原文
获取原文并翻译 | 示例
       

摘要

We study self-assembled InP quantum dot (QD) laser structures grown at two temperatures (690$^{circ}{rm C}$ and 730 $^{circ}{rm C}$) each with three different quantities of deposited quantum dot material (2, 2.5, and 3 mono-layers). The absorption spectra of these structures show features associated with the QD distributions and the magnitude of the absorption increases for samples where more material is deposited and for lower growth temperature. The 690$^{circ}{rm C}$ growth temperature structures exhibit nonradiative recombination and internal optical mode loss that increase with the quantity of material deposited; we suggest that the laser performance is limited by the presence of defects. The higher growth temperature samples have lower threshold current density and are limited by gain saturation. For these samples and for 2-mm long lasers with uncoated facets, the threshold current density is as low as 150 A ${rm cm}^{-2}$, emitting in the wavelength range around 730 nm.
机译:我们研究了在两种温度下生长的自组装InP量子点(QD)激光结构(690 <公式>, $ ^ {circ} {rm C} $ < / formula>和730 $ ^ {circ} {rm C} $ ),每个都有三种不同数量的沉积量子点材料(2、2.5和3个单层)。这些结构的吸收光谱显示出与QD分布相关的特征,并且对于沉积更多材料的样品和较低的生长温度,吸收的幅度会增加。 690 <分子式= inline“> $ ^ {circ} {rm C} $ 的生长温度结构表现出非辐射复合和内部光学模式损耗,并随沉积的物料数量;我们建议激光器的性能受到缺陷的限制。生长温度较高的样品具有较低的阈值电流密度,并受增益饱和的限制。对于这些样品以及具有未镀膜小面的2毫米长激光器,阈值电流密度低至150 A <公式公式类型=“ inline”> $ {rm cm} ^ {-2} $ ,在730 nm附近的波长范围内发射。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号