首页> 外文期刊>IEEE/ACM Transactions on Networking >Global Round Robin: Efficient Routing With Cut-Through Switching in Fat-Tree Data Center Networks
【24h】

Global Round Robin: Efficient Routing With Cut-Through Switching in Fat-Tree Data Center Networks

机译:Global Round Robin:胖树数据中心网络中具有直通交换的高效路由

获取原文
获取原文并翻译 | 示例

摘要

Fat tree is a scalable and widely deployed data center network topology. In this paper, a novel framework for designing per-packet load-balanced routing algorithms in fat tree called global round robin (GRR) is proposed. Routing in fat tree consists of uprouting and downrouting. In uprouting, a packet is sent to a switch that is a common ancestor (CA) of the source (server) and the destination. In downrouting, the packet is sent from the CA switch to the destination. Assume that time is slotted and each slot can accommodate one packet. With GRR, in each slot, a connection configuration is formed by establishing an uprouting path from each server to a spine switch port such that no paths will cross each other. Packets are sent from sources to respective spine switches with cut-through switching. The connection configuration is updated in a round robin fashion such that in every m slots, where $m$ is the number of spine switches, each server is connected to each spine switch exactly once. Since a CA does not need to be a spine switch, an improved GRR (IGRR) is then proposed to allow the nearest CA to intercept packets for downrouting. We prove that both GRR and IGRR can guarantee 100% throughput under a wide class of traffic. An analytical model is also constructed for studying their delay performance under uniform traffic. Finally, simulation results show that IGRR provides the best delay-throughput performance among all the existing per-packet load-balanced routing algorithms.
机译:胖树是一种可扩展且广泛部署的数据中心网络拓扑。本文提出了一种在胖树中设计每包负载均衡路由算法的新框架,称为全局循环(GRR)。胖树中的路由包括上路由和下路由。在向上路由时,数据包被发送到作为源(服务器)和目标的公共祖先(CA)的交换机。在下行路由中,数据包从CA交换机发送到目的地。假设有时间间隔,每个时间间隔可以容纳一个数据包。使用GRR,在每个插槽中,通过建立从每个服务器到主干交换机端口的向上路由路径来形成连接配置,以使任何路径都不会相互交叉。数据包通过直通交换从源发送到各个主干交换机。连接配置以循环方式进行更新,以使得在每m个插槽中(其中$ m $是主干交换机的数量),每个服务器与每个主干交换机恰好连接一次。由于CA不必是主干交换机,因此提出了一种改进的GRR(IGRR),以允许最近的CA截取数据包以进行下行路由。我们证明GRR和IGRR都可以在各种流量下保证100%的吞吐量。还构建了一个分析模型来研究它们在统一流量下的延迟性能。最后,仿真结果表明,IGRR在所有现有的每数据包负载均衡路由算法中提供了最佳的延迟吞吐量性能。

著录项

  • 来源
    《IEEE/ACM Transactions on Networking》 |2018年第5期|2230-2241|共12页
  • 作者单位

    College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China;

    College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China;

    College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China;

    Department of Electrical and Electronic Engineering, The University of Hong Kong, Hong Kong;

    College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Switches; Routing; Servers; Data centers; Round robin; Network topology; Throughput;

    机译:交换机;路由;服务器;数据中心;轮询;网络拓扑;吞吐量;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号