首页> 外文期刊>IEE proceedings. Part G, Circuits, devices and systems >3.6 mΩ cm2, 1726 V 4H-SiC normally-off trenched-and-implanted vertical JFETs and circuit applications
【24h】

3.6 mΩ cm2, 1726 V 4H-SiC normally-off trenched-and-implanted vertical JFETs and circuit applications

机译:3.6mΩcm2、1726 V 4H-SiC常关沟槽和注入垂直JFET及其电路应用

获取原文
获取原文并翻译 | 示例
       

摘要

A normally-off 4H-SiC trenched-and-implanted vertical JFET (TI-VJFET) with a low specific on-resistance has been demonstrated. The low specific on-resistance (Ron_sp) of 3.6 mΩ cm2 is achieved for a blocking voltage (Vbl) up to 1726 V by eliminating the internal lateral JFET gates. The TI-VJFET technology developed is advantageous in comparison to other reported VJFET technologies because it eliminates the need for epitaxial regrowth in the middle of device fabrication, only one mask requires critical alignment throughout device fabrication, and it provides intrinsically a much lower specific on-resistance owing to the elimination of internal lateral JFET gates. The Vbl2/Ron_sp value of 827 MW/cm2 for the TI-VJFET substantially surpasses all past records of both unipolar and bipolar SiC power switches. Multi-cell TI-VJFETs have been packaged and tested in an inductively loaded half-bridge inverter. Switching characteristics are reported. A 50 A Darlington transistor has also been developed using the TI-VJFET switches and results are given.
机译:已经证明具有低导通电阻的常关4H-SiC沟槽和注入垂直JFET(TI-VJFET)。通过消除内部横向JFET栅极,对于高达1726 V的阻断电压(Vbl),可实现3.6mΩcm2的低比导通电阻(Ron_sp)。与其他已报道的VJFET技术相比,开发的TI-VJFET技术具有优势,因为它消除了器件制造过程中外延再生的需要,整个器件制造过程中仅一个掩模就需要严格对准,并且本质上提供了低得多的比导通量。由于消除了内部横向JFET栅极而产生的电阻。 TI-VJFET的Vbl2 / Ron_sp值为827 MW / cm2,大大超过了以往单极和双极SiC功率开关的所有记录。多单元TI-VJFET已在电感负载半桥逆变器中进行了封装和测试。报告了开关特性。还使用TI-VJFET开关开发了50 A达林顿晶体管,并给出了结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号