...
首页> 外文期刊>Fire Technology >Optimal Safe Layout of Fuel Storage Tanks Exposed to Pool lire: One Dimensional Deterministic Modelling Approach
【24h】

Optimal Safe Layout of Fuel Storage Tanks Exposed to Pool lire: One Dimensional Deterministic Modelling Approach

机译:暴露于池里的燃料储罐的最佳安全布局:一维确定性建模方法

获取原文
获取原文并翻译 | 示例

摘要

Fire hazard is one of the main risks associated to fuel storage tanks in petroleum and in the petrochemical industries. Such a hazard includes pool fires in the storage tanks or in the bunds, fire propagation from the source tank to target tanks both in absence and in presence of wind, and also the cascading/domino effect due to confined and unconfined vapour cloud explosion and or BLEVE associated with the source tank. In the present work, a radiation shield of flowing water has been introduced at a distance from the source fuel storage tank to prevent the domino effect originating from this source tank, under fire, to the target fuel storage tanks in a tank farm. A simple one dimensional model has been developed from the steady state energy balance to simulate the safe distances (i.e. rim-rim distance) between fuel storage tanks containing class-I fuel (e.g. gasoline), both in presence and absence of a water-shield under no-wind and cross-wind conditions. The model predictions have shown that the maximum safe inter-tank separation distance of 28.42 m is anticipated at a wind velocity of 6 m/s, compared to 16.34 m in no-wind condition, beyond which the centroid of the parallelepiped (a solid-flame geometry) falls outside the base of the tilted flame geometry causing flattening of flame and a very sluggish increase in the flame tilt angle as the inverse of the Richardson number in the presence of wind velocity vector increases. Furthermore, the present one dimensional mathematical model has also been extended to show that introduction of a water-shield with an appropriate thickness (delta(opt)) is able to prevent the propagation of radiation heat flux under both no-wind and cross-wind conditions to a much lower distance close to 8.34 m between tanks (measured from the centre of the source tank), than those predicted from the existing empirical models; viz. Point Source model and Shokrie-Beyler's model.
机译:火灾隐患是与石油和石化行业的燃料储罐相关的主要风险之一。此类危险包括储罐或障壁中的水池起火,在无风和有风的情况下火从源罐传播到目标罐,以及由于密闭和无密闭的蒸气云爆炸而导致的级联/多米诺效应和/或与源水箱关联的BLEVE。在当前的工作中,在离源燃料储罐一定距离处引入了流动水的辐射屏蔽,以防止在着火时源于该源储罐的多米诺效应对罐区中的目标燃料储罐产生影响。根据稳态能量平衡,已经开发出一种简单的一维模型,以模拟有无水罩的情况下,装有I类燃料(例如汽油)的储油罐之间的安全距离(即轮辋距离)在无风和侧风条件下。模型预测表明,在风速为6 m / s时,预计最大安全罐间间距为28.42 m,而在无风条件下,则为16.34 m,在该距离之外,平行六面体的质心火焰几何形状)落在倾斜的火焰几何形状的底部之外,从而导致火焰变平,并且当存在风速矢量时,随着Richardson数的倒数增加,火焰倾斜角非常缓慢地增加。此外,目前的一维数学模型也得到了扩展,表明引入具有适当厚度(delta(opt))的挡水板能够在无风和侧风的情况下防止辐射热通量的传播。与现有的经验模型所预测的情况相比,条件之间的距离要低得多,接近两个储罐之间的距离(从源储罐的中心开始测量)为8.34 m;即点源模型和Shokrie-Beyler模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号