首页> 外文期刊>Finite Elements in Analysis and Design >Accurate solutions of wave propagation problems under impact loading by the standard, spectral and isogeometric high-order finite elements. Comparative study of accuracy of different space-discretization techniques
【24h】

Accurate solutions of wave propagation problems under impact loading by the standard, spectral and isogeometric high-order finite elements. Comparative study of accuracy of different space-discretization techniques

机译:通过标准,频谱和等几何高阶有限元,可以精确地解决冲击载荷下的波传播问题。不同空间离散技术精度的比较研究

获取原文
获取原文并翻译 | 示例

摘要

For the first time, accurate numerical solutions to impact problems have been obtained with the standard, spectral, and isogeometric high-order finite elements. Spurious high-frequency oscillations appearing in numerical results are quantified and filtered out by the two-stage time-integration approach. We also use the 1-D impact problem with a simple analytical solution for the comparison of accuracy of the different space-discretization techniques used for transient acoustics and elastodynamics problems. The numerical results show the computational efficiency of the linear finite elements with reduced dispersion compared with other space-discretization techniques used for elastodynamics with implicit and explicit time-integration methods. We also show that for all space-discretization methods considered (except the linear finite elements with the lumped mass matrix), very small Lime increments which are much smaller than stability limit should be used in basic computations at large observation times. We should note that the size of time increments used at the filtering stage and calculated according to the special formulas defines the range of actual frequencies and can be used as a quantitative measure for the comparison and prediction of the accuracy of different space-discretization techniques. We also show that the new findings are valid in the multidimensional case. (C) 2014 Elsevier B.V. All rights reserved.
机译:首次,使用标准,光谱和等几何高阶有限元获得了解决冲击问题的精确数值解决方案。数值结果中出现的虚假高频振荡可以通过两阶段时间积分方法进行量化和滤除。我们还将一维碰撞问题与简单的分析解决方案结合使用,以比较用于瞬态声学和弹性动力学问题的不同空间离散技术的准确性。数值结果表明,与其他用于弹性动力学的隐式和显式时间积分方法的空间离散技术相比,线性有限元的离散度降低了计算效率。我们还表明,对于所有考虑的空间离散化方法(具有集总质量矩阵的线性有限元除外),在大观测时间的基础计算中应使用非常小的Lime增量(远小于稳定性极限)。我们应该注意的是,在滤波阶段使用的并根据特殊公式计算出的时间增量的大小定义了实际频率的范围,并且可以用作比较和预测不同空间离散化技术准确性的定量方法。我们还表明,新发现在多维案例中是有效的。 (C)2014 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号