Effect of welding processes on fatigue crack growth behaviour of AISI 409M ferritic stainless steel joints fabricated using duplex stainless steel fillers

摘要

The present investigation aims to study the effect of welding processes such as shielded metal arc welding (SMAW), gas metal arc welding (GMAW) and gas tungsten arc welding (GTAW) on fatigue crack growth behaviour of the ferritic stainless steel (FSS) conforming to AISI 409M grade. Rolled plates of 4 mm thickness were used as the base material and AISI 2209 grade duplex stainless steel (DSS) was used as filler metal, for preparing single pass butt welded joints. Centre cracked tensile (CCT) specimens were used to evaluate the fatigue crack growth behaviour. From this investigation, it is found that the GTAW joints showed superior fatigue crack growth resistance compared with SMAW and GMAW joints. The reasons for the superior performance were discussed in detail.