首页> 外文期刊>Expert Systems with Application >FPGA-based adaptive PID control of a DC motor driver via sliding-mode approach
【24h】

FPGA-based adaptive PID control of a DC motor driver via sliding-mode approach

机译:通过滑模方法的基于FPGA的直流电机驱动器自适应PID控制

获取原文
获取原文并翻译 | 示例
       

摘要

The proportional-integral-derivative (PID) controller has been extensively applied in practical industry due to its appealing characteristics such as simple architecture, easy design and parameter tuning without complicated computation. However, the PID controller usually needs some a priori manual retuning to make a successful industrial application. To attack this problem, this paper proposes an adaptive PID (AP1D) controller which is composed of a PID controller and a fuzzy compensator. Without requiring preliminary offline learning, the PID controller can automatically online tune the control gains based on the gradient descent method and the fuzzy compensator is designed to eliminate the effect of the approximation error introduced by the PID controller upon the system stability in the Lyapunov sense. Finally, the proposed APID control system is applied to a DC motor driver and implemented on a field-programmable gate array (FPGA) chip for possible low-cost and high-performance industrial applications. It is shown by the experimental results that the favorable position tracking performance for the DC motor driver can be achieved by the proposed APID control scheme after learning of the controller parameters.
机译:比例积分微分(PID)控制器由于其引人注目的特性(如简单的结构,易于设计的参数调整而无需复杂的计算)已被广泛应用于实际工业中。但是,PID控制器通常需要先验手动调整才能成功进行工业应用。为了解决这个问题,本文提出了一种由PID控制器和模糊补偿器组成的自适应PID(AP1D)控制器。 PID控制器无需进行预备的离线学习,就可以基于梯度下降法自动对控制增益进行在线调整,并且模糊补偿器旨在消除PID控制器引入的逼近误差对Lyapunov意义上的系统稳定性的影响。最后,提出的APID控制系统被应用于直流电动机驱动器,并在现场可编程门阵列(FPGA)芯片上实现,以实现可能的低成本和高性能工业应用。实验结果表明,在学习控制器参数后,通过提出的APID控制方案可以实现直流电动机驱动器的良好位置跟踪性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号