A Novel Variable Reluctance Resolver with Nonoverlapping Tooth–Coil Windings

摘要

A novel variable reluctance (VR) resolver with nonoverlapping tooth–coil windings is proposed in this paper. It significantly simplifies the manufacturing process of multilayer windings in conventional products. Finite element (FE) analysis is used to illustrate the basic operating principle, followed by analytical derivation of main parameters and optimization of major dimensions, including air-gap length and slot opening width. Based on winding distributions and FE results, it is shown that identical stator and winding can be employed for a resolver with three different numbers of rotor poles. Further, other stator slot/rotor pole combinations based on the nonoverlapping tooth–coil windings are generalized. In addition, the influence of eccentricity and end-winding leakage on the proposed topology is investigated. Finally, a prototype is fabricated and tested to verify the analysis, including main parameters and electrical angle error.