首页> 外文期刊>Journal of Orthopaedic Surgery Research >Percutaneous elastic intramedullary nailing of metacarpal fractures: Surgical technique and clinical results study
【24h】

Percutaneous elastic intramedullary nailing of metacarpal fractures: Surgical technique and clinical results study

机译:掌骨骨折的经皮弹性髓内钉治疗:手术技术和临床结果研究

获取原文
           

摘要

Background We reviewed our results and complications of using a pre-bent 1.6 mm Kirschner wire (K-wire) for extra-articular metacarpal fractures. The surgical procedure was indicated for angulation at the fracture site in a true lateral radiograph of at least 30 degrees and/or in the presence of a rotatory deformity. Methods A single K-wire is pre-bent in a lazy-S fashion with a sharp bend at approximately 5 millimeters and a longer smooth curve bent in the opposite direction. An initial entry point is made at the base of the metacarpal using a 2.5 mm drill by hand. The K-wire is inserted blunt end first in an antegrade manner and the fracture reduced as the wire is passed across the fracture site. With the wire acting as three-point fixation, early mobilisation is commenced at the metacarpo-phalangeal joint in a Futuro hand splint. The wire is usually removed with pliers post-operatively at four weeks in the fracture clinic. Results We studied internal fixation of 18 little finger and 2 ring finger metacarpal fractures from November 2007 to August 2009. The average age of the cohort was 25 years with 3 women and 17 men. The predominant mechanism was a punch injury with 5 diaphyseal and 15 metacarpal neck fractures. The time to surgical intervention was a mean 13 days (range 4 to 28 days). All fractures proceeded to bony union. The wire was extracted at an average of 4.4 weeks (range three to six weeks). At an average follow up of 8 weeks, one fracture had to be revised for failed fixation and three superficial wound infections needed antibiotic treatment. Conclusions With this simple and minimally invasive technique performed as day-case surgery, all patients were able to start mobilisation immediately. The general outcome was good hand function with few complications.
机译:背景我们回顾了使用弯曲的1.6毫米克氏针(K线)治疗关节外掌骨骨折的结果和并发症。在至少30度的真实侧位X线照片和/或存在旋转畸形的情况下,指示要在骨折部位成角度的手术程序。方法一根K线以lazy-S方式预弯曲,在大约5毫米处有一个锐弯,在相反方向上弯曲有一个较长的平滑弯。用手在2.5毫米的钻头上在掌骨底部建立一个初始入口点。首先以顺行方式将K线插入钝端,并在将K线穿过骨折部位时减少骨折。用钢丝作为三点固定,在Futuro手夹板的掌指关节开始早期动员。在骨折诊所,通常在术后四个星期用钳子将金属丝去除。结果自2007年11月至2009年8月,我们研究了18例小指和2指无指掌骨骨折的内固定。该队列的平均年龄为25岁,其中3名女性和17名男性。其主要机制是打孔损伤,其中有5个干and端和15个掌骨颈骨折。手术时间平均为13天(4到28天)。所有骨折均进展为骨性结合。提取丝的平均时间为4.4周(三至六周)。平均随访8周,因固定失败而必须修复1处骨折,需要对3处表浅伤口感染进行抗生素治疗。结论通过这种简单,微创的技术进行日间手术,所有患者都能立即开始动员。总的结果是良好的手部功能,并发症很少。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号