...
首页> 外文期刊>The Open Ceramic Science Journal >Structural and Electrical Properties of Reaction Bonded Silicon Nitride Ceramics
【24h】

Structural and Electrical Properties of Reaction Bonded Silicon Nitride Ceramics

机译:反应键合氮化硅陶瓷的结构和电性能

获取原文
   

获取外文期刊封面封底 >>

       

摘要

The effects of structural properties on the d.c. and a.c. electrical properties of different weight gain reaction bonded silicon nitride (RBSN) have been studied in this work. The degree of nitridation is assessed by the ‘weight gain’ of the ceramic, the percentage by which the weight is increased in the nitriding reaction. From X-ray diffraction (XRD) patterns, it is observed that a higher degree of nitriadation sample has strong α-silicon nitride peaks. Intensity of α-silicon nitride peaks decreases with decreasing weight gain. The higher degrees of nitridation, the samples have less significant Si peak. XRD patterns were recorded to calculate the lattice parameters of RBSN. The lattice parameters for three weight gain RBSN samples are found to be a =b = 7.7727 ?, c= 5.6565 ? (26% weight gain), a=b= 7.6272 ?, c= 5.6374 ? (42% weight gain) and a=b=7.6158 ?, c= 5.7732 ? (58.27% weight gain) and are in good agreement with the reported values from XRD patterns. Porosity (%) and surface morphology was observed by SEM.
机译:结构特性对直流电的影响和交流在这项工作中已经研究了不同重量增加的反应键合氮化硅(RBSN)的电性能。氮化程度通过陶瓷的“增重”评估,即氮化反应中重量增加的百分比。从X射线衍射(XRD)图案可以看出,氮化程度较高的样品具有很强的α-氮化硅峰。随着重量增加,α-氮化硅峰的强度降低。氮化程度越高,样品的硅峰越少。记录XRD图案以计算RBSN的晶格参数。发现三个增重RBSN样本的晶格参数为a = b =7.7727Ω,c =5.6565Ω。 (体重增加26%),a = b =7.6272Ω,c =5.6374Ω。 (体重增加42%),a = b =7.6158Ω,c =5.7732Ω。 (体重增加58.27%),与XRD图谱的报告值非常吻合。通过SEM观察孔隙率(%)和表面形态。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号