A Study on the Corrosion Behavior in Sea Water of Welds Aluminum Alloy by Shielded Metal Arc Welding, Friction Stir Welding and Gas Tungsten Arc Welding

摘要

Three types of welds aluminum alloy 6061 were prepared using shielded metal arc welding (SMAW),friction stir welding (FSW) and gas tungsten arc welding (GTAW). In addition for the first time boraxpowder was used with GTAW in weld region to increase the corrosion resistance of aluminum alloys.The corrosion performances of those welds were evaluated in sea water by polarization and impedancetechniques. The results of polarization studies and electrochemical impedance spectrometry revealedthat borax powders can be used with GTAW technique to increase the corrosion resistance ofaluminum alloys. The corrosion potential was lowest for GTAWB (borax powder doped), followed byFSW, GTAW, base metal (BM) and then SMAW as determined using polarization techniques. Therate of corrosion of FSW was found lower compared to other welds. The electrochemical impedancespectrometry (EIS) carried out at a higher frequency exhibited a semicircular loop for friction stirwelds, indicating that its corrosion resistance was better than that of the other alloys studied. Atmedium frequency, the Warburg resistance observed for gas tungsten arc.