首页>外文会议>WSEAS international conference on computers;WSEAS CSCC Multiconference

WSEAS international conference on computers;WSEAS CSCC Multiconference

召开年：2011
召开地：Corfu Island(GR);Corfu Island(GR)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Mechanical Properties Analysis of Two Nanowires with Different Cross Section

机译：两种截面积不同的纳米线的力学性能分析
- 作者：ABBAS RAHI;MOHAMMAD ALIARJOMANDI;REZA ABEDI
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- nanowires;
- mechanical properties;
- shape effects;
- nano structures;
2.Effect of Slip Factor in Hydrodynamic Behaviors of basic Micro-Flows Problems

机译：滑移因子对基本微流问题水动力行为的影响
- 作者：K. Bataineh;A. F. Khadrawi;M. A. Al-Nimr
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- falling film;
- fully developed;
- incompressible;
- micro-cylinder;
- micro-sphere;
- micro-flows hydrodynamic behavior;
- newtonian;
3.Researches on the influence of gas content from the steel on its quality

机译：研究钢中气体含量对其质量的影响
- 作者：DRAGOI FLORIN;SOCALICI ANA;HEPUT TEODOR;ARDELEAN ERIKA
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- steel;
- hydrogen;
- nitrogen;
- oxygen;
- quality;
- characteristics of materials;
4.Research on Desulphurization of Steel with Calcium Aluminate Synthetic Slag with Addition of Titanium Oxide

机译：铝酸钙合成渣加氧化钛对钢脱硫的研究
- 作者：PUJAN ADRIANA;HEPUT TEODOR;VILCEANU LUCIA;PUTAN VASILE
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- synthetic slag;
- steel;
- fluorine;
- refining;
- desulphurisation process;
- regression surfaces;
- lime;
- ladle;
5.Performance analysis of re-entrant manufacturing networks under surplus-based production control

机译：基于剩余生产控制的可重入制造网络的绩效分析
- 作者：K.K. Starkov;A.Y. Pogromsky;I.J.B.F. Adan;J.E.Rooda
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- manufacturing systems;
- tracking systems;
- discrete time systems;
- production control;
- boundary condi-tions;
6.Contributions on the Study of Internal Flaws in Continuous Cast Semi-Finished Products

机译：连铸半成品内部缺陷研究的贡献
- 作者：POPA ERIKA;HEPUT TEODOR;ARDELEAN ERIKA;SOCALICI ANA
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- continuous casting;
- steel;
- internal flaws;
- fissures;
- micro-shrinkage;
- central porosity;
7.Research on the influence of binders with basic data base on compressive strength of pellets

机译：基于基础数据的粘结剂对颗粒抗压强度影响的研究
- 作者：EUGEN CRISAN;MARIUS ARDELEAN;LUCIA VILCEANU;TEODOR HEPUT
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- pellets;
- compressive strength;
- bentonite;
- lime;
- dolomite;
- binder;
- steel plant dust;
8.Research on Quality of steel for Production of Rolling Cylinders

机译：轧制圆筒用钢的质量研究
- 作者：ADINA PAUCAJEODOR HEPUT;VIRGINIA SOCALICI;ANA JOSAN
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- rolling;
- rolling mill cylinders;
- adamit;
- quality;
- mechanical;
9.Theoretical Research on the Failure Mode and Effects Analysis (FMEA) Method and Structure

机译：失效模式与影响分析（FMEA）方法与结构的理论研究
- 作者：FLORINA-CRISTINA FILIP
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
10.Experimental Investigation for the Elimination of Heat Treatment Related Distortion for the Production of 'Grizzly bar' Casting Made of (12-14) Manganese Steel

机译：消除由（12-14）％锰钢制成的'灰棒'铸件的热处理引起的变形的实验研究
- 作者：MOHAMMAD HAYAJNEH;MOHAMMAD AL-TAHAT;WALID KHRAISAT;SALMAN ALSHOBAKI
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- heat treatment;
- distortion;
- steel casting;
- manganese steel;
- casting defects;
11.Evaluation of using advanced manufacturing technologies and clusters of advanced technologies

机译：评估使用先进制造技术和先进技术集群
- 作者：JAN HRIBIK
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- advanced manufacturing technologies;
- AMT;
- clusters of advanced technologies;
- CAT;
- profit;
- added value;
- test criterion;
- critical value;
12.The profitability of companies operating in the Czech Stone Cluster and its impacts

机译：在捷克石材集群中运营的公司的盈利能力及其影响
- 作者：JAN HRIBIK
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- cluster;
- profit;
- crisis;
- czech stone cluster;
- development;
- significance level;
- hypothesis;
- assumption;
- test criterion;
- critical value;
13.Finite Elements Method (FEM) Investigation Seamless Pipes Production Hot Pilger Rolling Process

机译：有限元方法研究无缝钢管生产热P轧制工艺
- 作者：ABBAS RAHI;S.JAVAD JANDAGHI;A.HOSSEIN JALALI;REZA ABEDI
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- finite element;
- hot pilger;
- seamless pipes;
- simulation process;
14.Supply Chain Organization and Management in French SMEs: An Exploratory Study

机译：法国中小企业的供应链组织和管理：探索性研究
- 作者：CALIN GURAU
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- supply chain logic;
- success factors;
- organizational restructuring;
- french SMEs;
- manufacturing and distribution firms;
15.An overview of Critical Chain applied to Project Management

机译：关键链应用于项目管理概述
- 作者：FRANCISCO CORREIA;ANTONIO ABREU
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- project management;
- theory of constraints;
- critical chain;
- PERT/CPM;
- project scheduling;
16.Architecture of Knowledge Management in the Manufacturing Process

机译：制造过程中的知识管理架构
- 作者：DASCHIEVICI LUIZA;GHELASE DANIELA;MARINESCU VASILE
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- knowledge;
- knowledge management (KM);
- knowledge-based economy (KBE);
- manufacturing process;
17.Considerations on Knowledge Management in Cutting Process

机译：裁剪过程中知识管理的思考
- 作者：DANIELA GHELASE;LUIZA DASCHIEVICI;VASILE MARINESCU
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- knowledge management;
- mechanical engineering;
- information technology;
- machining system;
- marketing knowledge;
- competitive management;
18.Aspects of the defect analysis methodology

机译：缺陷分析方法的各个方面
- 作者：LEONID KUZNETSOV;NIKITA DORIN
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- quality management;
- defect analysis;
- statistical methods;
- sampling analysis;
- metallurgy;
19.Hardware-in-the-Loop Simulation of an Active Heave Compensated Drawworks

机译：主动升沉补偿绞车的硬件在环仿真
- 作者：Sanin Muraspahic;Lawk Farji;Yousef Iskandarani;Hamid Reza Karimi
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- active heave compensation (AHC);
- draw-works;
- hardware-in-the-loop (HIL);
- hoisting rig;
- programmable logic controller (PLC);
20.Modeling and Simulation of an Active Heave Compensated Draw-works

机译：主动升沉补偿工程的建模与仿真
- 作者：Ahmed A. Walid;Peter Gu;Yousef Iskandarani;Hamid Reza Karimi
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- active heave compensation (AHC);
- draw-works;
- hoisting rig;
- modeling;
- simulation;
21.Estimation of a Normal Process Variance from Measurements with Large Round-Off Errors

机译：根据具有较大舍入误差的测量值估算正常过程方差
- 作者：BENSON-KARHI DIAMANTA;DVIR ELLITE
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- control chart;
- level of quantization;
- measurement error;
- method of moments;
- curve fitting;
- round-off error;
- statistical process control;
22.A Study for Tool Deflection in using Actual Shape

机译：使用实际形状的刀具变形研究
- 作者：Hae-Soo Lee;Jin-Ah Kim;Byung-Hun Park
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- FME;
- reverse engineering;
- endmill;
- HSS;
- actual shape;
- bending test;
23.Determination of the Forming Conditions of fitting Pipes Using the Bulging Processes

机译：用膨胀工艺确定管件的成形条件
- 作者：SeungGul Baek;TaeGul Kim;SeungKyu Kim
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- press forming;
- die design;
- fitting pipe;
- forge;
- bulging;
- hydroforming;
24.A Study for FCAW Welding Fabrication Characteristics of Marine Structure

机译：海洋结构的FCAW焊接制作特性研究
- 作者：Sung-Hwan Jee;Jung-Do Chun;Min-Sik Han
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- SLA360;
- FCAW;
- groove angle;
- ampere density;
- voltage density;
25.New Software to Generate the CNC Code For Turning Operations

机译：生成用于车削操作的CNC代码的新软件
- 作者：R.T. CURTA;N. BALC;A. CAREAN
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- CAD-CAM;
- CNC;
- turning;
- autoLISP;
- autoCAD;
26.The impact of ionizing radiation on the mechanism of current transition in TlInSe_2 monocrystals

机译：电离辐射对TlInSe_2单晶电流转变机理的影响
- 作者：R.S.Madatov;A.I.Najafov;T.B.Taghiyev;M.A.Mehrabova;M.R.Gazanfarov
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- radiation;
- energy;
- monocrystals;
- defect;
- specific resistance electroconductivity;
27.Prediction of Inventory Levels and Capacity Utilization with Artificial Neural Networks

机译：人工神经网络预测库存水平和产能利用率
- 作者：BERND SCHOLZ-REITER;FLORIAN HARJES;AMIR KAVIANI MEHR
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- artificial intelligence;
- artificial neural networks;
- elman networks;
- prediction;
- shop floor production;
- predictive control;
- inventory;
- capacity utilization;
28.A Comparison of the Distortion of Machined Parts Resulting From Residual Stresses Within Workpieces

机译：工件内部残余应力导致的机械零件变形的比较
- 作者：J-F. CHATELAIN;J-F. LALONDE;A.S. TAHAN
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- CAD/CAM;
- machining;
- residual stresses;
- part distortion;
- neutron scattering;
- thin walls;
29.Effect of Tool Geometry Special Features on Cutting Forces of Multilayered CFRP Laminates

机译：刀具几何特性对多层CFRP层压板切削力的影响
- 作者：J-F. CHATELAIN;I. ZAGHBANI
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- detouring;
- composites;
- CFRP;
- tool geometry;
- groove-teeth;
- cross cut;
- cutting forces;
30.Investigating the Influence of TQM Elements on the Overall Performance of Jordanian Municipalities Case Study: Greater Irbid Municipality GIM

机译：研究TQM要素对约旦市政整体绩效的影响案例研究：大灾变市政GIM
- 作者：MOHAMMAD D. AL-TAHAT;TAYSEER A. DARADKEH
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- TQM;
- Jordan;
- municipalities;
- continuous improvement;
- service performance;
31.Research on Friction Stir Welding and Tungsten Inert Gas assisted Friction Stir Welding of Copper

机译：铜的搅拌摩擦焊和钨极惰性气体辅助搅拌摩擦焊的研究
- 作者：ELENA SCUTELNICU;DAN BIRSAN;RADU COJOCARU
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- friction stir welding;
- TIG assisted FSW;
- temperature field;
- copper;
32.Behaviour Simulation of Aluminium Alloy 6082-T6 during Friction Stir Welding and Tungsten Inert Gas Welding

机译：搅拌搅拌和钨极惰性气体保护铝合金6082-T6的行为模拟
- 作者：DAN BIRSAN;ELENA SCUTELNICU;DANIEL VISAN
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- FSW;
- TIG;
- aluminium alloy;
- heat transfer;
- tensile test;
- simulation;
33.An Immersive Virtual Reality Training System for Mechanical Assembly

机译：用于机械装配的沉浸式虚拟现实培训系统
- 作者：AMAURY PENICHE;CHRISTIAN DIAZ;HELMUTH TREFFTZ;GABRIEL PARAMO
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- training system;
- virtual reality;
- manufacturing;
- mechanical assembly;
34.Effects of Temperature in Relation to Sheet Metal Stamping

机译：温度对钣金冲压的影响
- 作者：PAUL C OKONKWO;MICHAEL P PEREIRA;GEORGINA KELLY;BERNARD F ROLFE
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- tool wear;
- frictional heat;
- D2 tool steel;
- sheet- metal stamping;
- pin-on-disc wear test;
35.Investigation of the Effect of Changing Operating Temperature on the Creep Life and natural Frequencies of Gas Turbine Blade

机译：研究改变工作温度对燃气轮机叶片蠕变寿命和固有频率的影响
- 作者：ABBAS RAHI;MOHSEN PAPARI
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- gas turbine blade;
- stress analysis;
- creep life;
- natural frequencies;
36.Researches Regarding the Improvement of Workpieces Surface Finish by Machining through Superfinishing Process

机译：超精加工机加工提高工件表面光洁度的研究
- 作者：BADEA LEPADATESCU;ADELA-ELIZA DUMITRASCU;IOAN ENESCU;ANISORNEDELCU
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- superfinishing process;
- surface quality;
- productivity;
- accuracy;
37.Kinematics of a Variable Compression Ratio Engine

机译：可变压缩比发动机的运动学
- 作者：ADRIAN GABOR;PAUL GRIGORE;EUGENIA SECARA;LEONTE PETRIC;IOAN-SERBAN RADU
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- variable compression ratio VCR;
- engine;
- fuel-efficient;
38.Mathematical Model used for the Vibration Insulation within a Car

机译：用于汽车内隔振的数学模型
- 作者：IONATAN POP A;EUGENIA SECARA;LEONTE PETRIC;VIOLETA GUIMAN;CAROL AMBRUS;VLASE SORIN
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- vibration insulation;
- material;
- transmissibility;
- amplitude of vibrations;
39.Reseach on the Recovery of Oil in the Iron and Steel Mill Scale

机译：钢铁厂规模油回收研究
- 作者：MARIA LAURA STRUGARIU;SORINA SERBAN;ERIKA ARDELEAN;ANA SOCALICI;TEODOR HEPUT
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- mill scale;
- waste;
- briquette;
- recovery;
- experimentation;
- briquetting;
40.Design and control of an automatized stacker crane for warehouses

机译：仓库自动化堆高机的设计与控制
- 作者：JOZEF DORNER;MICHAL BLAHO
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- control;
- warehouse stacker crane;
- CAN bus;
- PLC system;
- WEB technology;
41.Interconnecting Matlab with TwinCAT

机译：将Matlab与TwinCAT互连
- 作者：EUDOVIT FARKAS;LUBOSLAV JANICEK;JAN MURGAS;JURAJ HNAT
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- etherCAT;
- twinCAT;
- matlab;
- simulink;
- networked control systems;
42.Networked control systems with PROFINET and IWLAN

机译：带有PROFINET和IWLAN的网络控制系统
- 作者：MICHAL BLAHO;LEO MRAFKO;MARTIN URBAN;JAN MURGAS
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- networked control systems;
- PROFINET;
- IWLAN;
- DC motor;
- programmable logic controller;
- identification;
- process control;
43.Robust Quality Analysis Using Coarsely Discretized Measurements

机译：使用粗离散测量进行可靠的质量分析
- 作者：MAXIME DEREGNAUCOURT;MARTIN KOZEK
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- statistical hypothesis test;
- censured data;
- outlier-robust;
- small sample size;
- goodness of fit;
- kolmogorov-smirnov distance;
- likelihood;
- distribution;
44.Intelligent Manufacturing and Computer Integration Manufacturing Systems

机译：智能制造和计算机集成制造系统
- 作者：SMONA SOFIA DUICU;LUMINITA POPA
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- artificial intelligence;
- CAD/CAM programming system;
- CNC laser cutting machine tool;
45.Risk Assessment of Radiological and Non-radiological Hazard for Accident Prevention in Decommissioning Activities

机译：退役活动中放射性和非放射性危害预防事故的风险评估
- 作者：HYEON-KYO LIM;KWAN-SEONG JEONG;KUNE-WOO LEE
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- risk assessment;
- hazard;
- accident prevention;
- human error;
- decommissioning;
46.HMLV Manufacturing Systems Simulation Analysis Using the Database Interface

机译：使用数据库接口的HMLV制造系统仿真分析
- 作者：JURAJ SVANCARA
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- HMLV manufacturing system;
- simulation;
- analysis;
- database system;
- production scheduling;
47.The Importance of Preventive Maintenance in terms of Reliability in Aviation Sector

机译：预防性维护在航空领域可靠性中的重要性
- 作者：EMRE KIYAK
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- reliability;
- maintenance;
- preventive maintenance;
- mean time to failure;
48.Prevent of Wrinkling and Rupturing Using a New Method Based on Punch Force in Hydro-Mechanical Deep Drawing Process

机译：液压机械深冲过程中基于冲力的新方法防止起皱和破裂
- 作者：HAMED ZIAEIPOOR
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- hydromechanical deep drawing;
- finite element method;
- wrinkling;
- variable blank holder force;
- closed loop control;
- strain analysis;
49.
- 会议名称：《》
50.Predictioln the limiting drawing ratio in Deep Drawing process by Artificial Neural Network

机译：用人工神经网络预测深加工过程中的极限拉伸比。
- 作者：H.Mohammadi Majd;M.Jalali Azizpour
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- back-propagation (BP);
- deep drawing;
- prediction;
- limiting drawing ratio (LDR);
51.Surface roughness prediction for turning operations by neural network

机译：神经网络预测车削表面粗糙度
- 作者：H.Mohammadi Majd;M.Jalali Azizpour;GH. Davoudi;M Goodarzi
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- back propagation artificial neural network (BPANN);
- prediction;
- roughness;
- turning;
52.Towards Manufacturing Concepts Unity

机译：迈向制造概念统一
- 作者：IONEL BOTEF
- 会议名称：《》 | 2011年
- manufacturing;
- production;
- concepts;
- unity;
- integration;
53.Prioritizing 5S Activities by Kano Model For a Semiconductor Wafer Fabrication

机译：通过Kano模型确定5S活动的优先级，以制造半导体晶圆
- 作者：Chuan-Yung Chen;Yung-Chia Chang
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- 5S practice;
- kano model;
- attractive quality;
- CS-coefficient;
- semiconductor fabrication;
54.Effect of interactive normal and lateral Stiffness, damping and tip dimensions on the flexural and torsional vibration modes of rectangular AFM cantilevers

机译：交互法向和横向刚度，阻尼和尖端尺寸对矩形AFM悬臂梁的弯曲和扭转振动模式的影响
- 作者：MEHDI SHEKARZADEH;ABBAS RAHI
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- atomic force microscope (AFM);
- vibration analysis;
- flexuaral vibration;
- torsional vibration;
- cantilever;
55.Managing Manufacturing Enterprise System and CAPP System Complexity: An Investigatory Perspective

机译：管理制造业企业系统和CAPP系统复杂性的调查研究
- 作者：IONEL BOTEF
- 会议名称：《WSEAS international conference on computers;WSEAS CSCC Multiconference》 | 2011年
- complexity;
- manufacturing;
- software;
- CAPP;
- integration;