首页> 外文期刊>Analytical Sciences >Determination of Traces of Cadmium in Natural Water Samples by Flow Injection On-line Preconcentration-Graphite Furnace Atomic Absorption Spectrometry
【24h】

Determination of Traces of Cadmium in Natural Water Samples by Flow Injection On-line Preconcentration-Graphite Furnace Atomic Absorption Spectrometry

机译:流动注射在线富集-石墨炉原子吸收光谱法测定天然水样中的痕量镉

获取原文
           

摘要

A flow injection on-line preconcentration-graphite furnace atomic absorption spectrometric method was developed for the determination of traces of cadmium in natural water samples. Cadmium in samples was adsorbed on an iminodiacetate-type chelating resin, Muromac A-1 microcolumn (3 mm i.d. and 10 mm long), and then eluted with 2 mol l-1 HNO3. The eluate was introduced into the injection tip of an autosampler. The eluate zone with the highest analyte concentration was injected into the graphite furnace by cooperation of a peristaltic pump and a syringe pump of the autosampler, which were controlled by a programmable controller. The present system was successfully applied to the determination of cadmium in natural water samples. A detection limit of 0.2 ng l-1 was obtained with 12 ml sample loading. The recoveries were 99 and 108% for tap water (4 ml loading) and underground water (12 ml loading), respectively. Analytical results obtained for a river water reference material (JAC-0031, Japan Society for Analytical Chemistry) were close to the reference value.
机译:建立了流动注射在线富集-石墨炉原子吸收光谱法测定自然水样中痕量镉的方法。将样品中的镉吸附在亚氨基二乙酸酯型螯合树脂Muromac A-1微柱上(内径3毫米,长10毫米),然后用2摩尔升1-1 HNO3洗脱。将洗脱液引入自动进样器的进样针头中。通过自动进样器的蠕动泵和注射泵的配合,将分析物浓度最高的洗脱液区注入石墨炉,并由可编程控制器进行控制。本系统已成功应用于天然水样中镉的测定。样品量为12 ml时,检测限为0.2 ng l-1。自来水(4 ml装)和地下水(12 ml装)的回收率分别为99%和108%。河流水参考物质(JAC-0031,日本分析化学学会)获得的分析结果接近参考值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号