首页> 外文期刊>Control Engineering Practice >Experimental evaluation of decentralized cooperative cruise control for heavy-duty vehicle platooning
【24h】

Experimental evaluation of decentralized cooperative cruise control for heavy-duty vehicle platooning

机译:分散式协同巡航控制在重型汽车排上的实验评估

获取原文
获取原文并翻译 | 示例

摘要

In this paper, we consider the problem of finding decentralized controllers for heavy-duty vehicle (HDV) platooning by establishing empiric results for a qualitative verification of a control design methodology. We present a linear quadratic control framework for the design of a high-level cooperative platooning controller suitable for modern HDVs. A nonlinear low-level dynamical model is utilized, where realistic response delays in certain modes of operation are considered. The controller performance is evaluated through numerical and experimental studies. It is concluded that the proposed controller behaves well in the sense that experiments show that it allows for short time headways to achieve fuel efficiency, without compromising safety. Simulation results indicate that the model mimics real life behavior. Experiment results show that the dynamic behavior of the platooning vehicles depends strongly on the gear switching logic, which is confirmed by the simulation model. Both simulation and experiment results show that the third vehicle never displays a bigger undershoot than its preceding vehicle. The spacing errors stay bounded within 6.8 m in the simulation results and 7.2 m in the experiment results for varying transient responses. Furthermore, a minimum spacing of - 0.6 m and -1.9 m during braking is observed in simulations and experiments, respectively. The results indicate that HDV platooning can be conducted at close spacings with standardized sensors and control units that are already present on commercial HDVs today.
机译:在本文中,我们考虑通过建立经验性结果来对控制设计方法进行定性验证,从而找到重型车辆(HDV)排班分散控制器的问题。我们提出了一个线性二次控制框架,用于设计适用于现代HDV的高级协作排控制器。利用了非线性的低级动力学模型,其中考虑了某些操作模式下的实际响应延迟。通过数值和实验研究评估控制器的性能。结论是,在实验表明该控制器允许短时间前进以实现燃油效率的同时,不影响安全性的意义上,该控制器表现良好。仿真结果表明该模型模拟了现实生活中的行为。实验结果表明,成排车辆的动力学行为在很大程度上取决于档位切换逻辑,仿真模型证实了这一点。仿真和实验结果均表明,第三辆车辆的下冲从未超过其先前的车辆。对于变化的瞬态响应,仿真结果中的间距误差保持在6.8 m以内,实验结果中的误差保持在7.2 m以内。此外,分别在模拟和实验中观察到制动期间的最小间距-0.6 m和-1.9 m。结果表明,可以使用当今商用HDV上已经存在的标准化传感器和控制单元以近距离进行HDV排。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号