首页> 外文期刊>Applied Surface Science >Dynamics of the formation of laser-induced periodic surface structures (LIPSS) upon femtosecond two-color double-pulse irradiation of metals, semiconductors, and dielectrics
【24h】

Dynamics of the formation of laser-induced periodic surface structures (LIPSS) upon femtosecond two-color double-pulse irradiation of metals, semiconductors, and dielectrics

机译:飞秒双色金属,半导体和电介质双脉冲辐射下激光诱导的周期性表面结构(LIPSS)形成的动力学

获取原文
获取原文并翻译 | 示例

摘要

In order to address the dynamics and physical mechanisms of LIPSS formation for three different classes of materials (metals, semiconductors, and dielectrics), two-color double-fs-pulse experiments were performed on Titanium, Silicon and Fused Silica. For that purpose a Mach-Zehnder interferometer generated polarization controlled (parallel or cross-polarized) double-pulse sequences at 400 nm and 800 nm wavelength, with inter-pulse delays up to a few picoseconds. Multiple of these two-color double-pulse sequences were collinearly focused by a spherical mirror to the sample surfaces. The fluence of each individual pulse (400 nm and 800 nm) was always kept below its respective ablation threshold and only the joint action of both pulses lead to the formation of LIPSS. Their resulting characteristics (periods, areas) were analyzed by scanning electron microscopy. The periods along with the LIPSS orientation allow a clear identification of the pulse which dominates the energy coupling to the material. For strong absorbing materials (Silicon, Titanium), a wavelength-dependent plasmonic mechanism can explain the delay-dependence of the LIPSS. In contrast, for dielectrics (Fused Silica) the first pulse always dominates the energy deposition and LIPSS orientation, supporting a non-plasmonic formation scenario. For all materials, these two-color experiments confirm the importance of the ultrafast energy deposition stage for LIPSS formation. (C) 2015 Elsevier B.V. All rights reserved.
机译:为了解决三种不同类型的材料(金属,半导体和电介质)形成LIPSS的动力学和物理机理,在钛,硅和熔融石英上进行了双色双fs脉冲实验。为此,Mach-Zehnder干涉仪产生了波长为400 nm和800 nm的偏振控制(平行或交叉偏振)双脉冲序列,脉冲间延迟高达几皮秒。这些双色双脉冲序列中的多个通过球面镜共线聚焦到样品表面。每个单独脉冲(400 nm和800 nm)的注量始终保持在其各自的消融阈值以下,并且只有两个脉冲的共同作用才导致形成LIPSS。通过扫描电子显微镜分析了它们产生的特性(周期,面积)。周期与LIPSS方向一起可以清楚地识别出脉冲,该脉冲主导着耦合到材料的能量。对于强吸收材料(硅,钛),取决于波长的等离子体机制可以解释LIPSS的延迟依赖性。相比之下,对于电介质(熔融石英),第一个脉冲始终主导着能量沉积和LIPSS方向,从而支持非等离子体形成的情况。对于所有材料,这些两种颜色的实验证实了超快速能量沉积阶段对LIPSS形成的重要性。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号