首页> 外文期刊>Applied Surface Science >Na role during sulfurization of NaF/Cu/SnS2 stacked precursor for formation of Cu2SnS3 thin film as absorber of solar cell
【24h】

Na role during sulfurization of NaF/Cu/SnS2 stacked precursor for formation of Cu2SnS3 thin film as absorber of solar cell

机译:Na在NaF / Cu / SnS2堆叠前体的硫化过程中对形成Cu2SnS3薄膜作为太阳能电池吸收剂的作用

获取原文
获取原文并翻译 | 示例

摘要

Cu2SnS3 (CTS) is one of the intriguing absorbers owing to the earth-abandant and nontoxic element. Reaction paths for formations of CTS films through sulfurization of NaF/Cu/SnS2 (with NaF) and Cu/SnS2 (without NaF) stacked precursors are examined. It is revealed that Cu2SnS3 in the resulting film with NaF starts to be formed at the substrate temperature from 400 degrees C, while Cu2SnS3 in the film without NaF begins to be formed at the substrate temperature over 500 degrees C The crystalline grains of resulting CTS films are markedly enlarged by Na addition, where Na is accumulated in the large grain area. The Na has a significant impact on the formation of CTS crystalline grains at lower substrate temperature, thus inducing the enlargement of the crystalline grains. In addition, the monoclinic CTS structure in the absorbers of the CTS solar cells can be formed at the lower temperature with the help of NaF. In addition, Cu2Sn3S7 phase and/or NaxCuSnS3 (x=0.5-1.0) are only observed in CTS films with NaF. (C) 2017 Elsevier B.V. All rights reserved.
机译:由于富含地球和无毒元素,Cu2SnS3(CTS)是吸引人的吸收剂之一。考察了通过NaF / Cu / SnS2(含NaF)和Cu / SnS2(不含NaF)堆叠的前驱体硫化形成CTS膜的反应路径。结果表明,在400℃以上的基板温度下,开始形成含NaF的膜中的Cu 2 SnS 3,而在500℃以上的基板温度下开始形成无NaF的膜中的Cu 2 Sn 3S。 Na的添加显着扩大了Na的含量,其中Na积累在大晶粒区域中。 Na在较低的基板温度下对CTS晶粒的形成具有显着影响,因此引起晶粒的扩大。另外,借助于NaF可以在较低的温度下形成CTS太阳能电池的吸收体中的单斜CTS结构。另外,仅在具有NaF的CTS膜中观察到Cu 2 Sn 3 S 7相和/或NaxCuSnS 3(x = 0.5-1.0)。 (C)2017 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号