Critical Current Measurements on$rm Nb_3rm Sn$Conductors for the NED Project

摘要

The Next European Dipole (NED) project is a EU funded program aiming at the realization of a 15 T accelerator-type of$ Nb_3 Sn$dipole magnet. The objective of NED phase one is developing high performance$ Nb_3 Sn$conductor in collaboration with European industry. The envisaged Rutherford type of cable consists of about 40 superconducting strands exhibiting a noncopper critical current density of 1500$ A/mm^2$at 4.2 K and 15 T. In the frame of conductor development, adequate critical current measurements in terms of accuracy and reproducibility should be ensured to qualify the ambitious strands produced. Therefore, a NED working group focuses at the establishment and implementation of appropriate and standardized procedures for sample preparation and mounting, critical current measurement, data analysis and reporting. A cross-calibration program between the institutes involved has been initiated by exchanging samples of$ Nb_3 Sn$conductor from a single billet for critical current measurements, prepared at each institute. The experimental results of this program and the conclusive procedures for NED critical current measurements are presented and discussed.