...
首页> 外文期刊>Applied Physics. A, Materials Science & Processing >'Positive' and 'negative' electric-pulse-induced reversible resistance switching effect in Pr_(0.7)Ca_(0.3)MnO_3 films
【24h】

'Positive' and 'negative' electric-pulse-induced reversible resistance switching effect in Pr_(0.7)Ca_(0.3)MnO_3 films

机译:Pr_(0.7)Ca_(0.3)MnO_3薄膜中“正”和“负”电脉冲诱导的可逆电阻转换效应

获取原文
获取原文并翻译 | 示例
           

摘要

"Negative" electric-pulse-induced reversible resistance (EPIR) switching phenomenon was found in In/PCMO/Pt sandwich, in which the high resistance can be written with positive voltage pulses, and the low resistance can be reset using negative voltage pulses (the positive voltage direction is defined as going from the top electrode to the bottom electrode). This is just the opposite from the "positive" EPIR effect in Ag/PCMO/Pt sandwich, in which the high resistance can be written only with negative voltage pulses, and the low resistance can be reset using positive voltage pulses. The Ⅰ-Ⅴ hysteresis curves of In/PCMO/Pt and Ag/PCMO/Pt sandwiches also show opposite directions, i.e., counterclockwise and clockwise under a negative voltage region for indium and Ag electrode systems, respectively. C-V characteristics show that the barrier does not exist in Ag/PCMO/Pt sandwich, while In/PCMO/Pt sandwich exhibits an obvious Schottky-like barrier. We suggest that in the negative EPIR behavior in In/PCMO/Pt structure, the resistance states are mainly controlled changing the Schottky-like barrier at the interface with the weak effect of carrier trapping process, while the positive EPIR behavior in Ag/PCMO/Pt sandwich mainly depends on the carrier trapping process at the interface.
机译:在In / PCMO / Pt夹层中发现了“负”脉冲感应可逆电阻(EPIR)切换现象,其中高电阻可以用正电压脉冲写入,而低电阻可以使用负电压脉冲进行复位(正电压方向定义为从顶部电极到底部电极。这与Ag / PCMO / Pt三明治中的“正” EPIR效应恰好相反,在后者中,高电阻只能用负电压脉冲写入,而低电阻可以用正电压脉冲复位。 In / PCMO / Pt和Ag / PCMO / Pt三明治的Ⅰ-Ⅴ磁滞曲线也显示相反的方向,即在铟和银电极系统的负电压区域分别为逆时针和顺时针。 C-V特性表明,Ag / PCMO / Pt夹层中不存在该势垒,而In / PCMO / Pt夹层中则表现出明显的肖特基样势垒。我们认为,在In / PCMO / Pt结构的负EPIR行为中,电阻状态主要受载流子俘获过程的弱影响而改变界面处的肖特基势垒,而在Ag / PCMO / Pt夹层主要取决于界面处的载流子俘获过程。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号