首页> 外文期刊>Applied Mathematical Modelling >Terminal sliding mode control with non-symmetric input saturation for vibration suppression of electrostatically actuated nanobeams in the presence of Casimir force
【24h】

Terminal sliding mode control with non-symmetric input saturation for vibration suppression of electrostatically actuated nanobeams in the presence of Casimir force

机译:具有非对称输入饱和度的终端滑模控制,用于在存在卡西米尔力的情况下抑制静电致动纳米束的振动

获取原文
获取原文并翻译 | 示例
       

摘要

In the present article, a robust sliding mode controller and a disturbance-observer-based terminal sliding mode tracking controller with finite time convergence are proposed for stabilization of a functionally graded and homogeneous nanobeam. The considered nanobeam is modeled based on the nonlocal strain gradient theory and Euler-Bernoulli beam theory and subjected to Casimir force. Electrostatic actuation is considered in the governing equations of the system as the control input modeling. The Galerkin approach is employed to reduce the governing nonlinear partial differential equation of motion to a nonlinear ordinary differential equation with quadratic and cubic nonlinearities. The robust sliding mode controller is designed for stabilization of the nanobeam with the uncertain parameters which eliminates chattering. Furthermore, a disturbance-observer-based terminal sliding mode controller is used for stabilization of the nanobeam in the presence of an external load disturbance and unknown non-symmetric input saturation which is useful for when a constraint exists in the system control input due to the electrostatic actuation. Simulation results are presented and comparisons of the suggested control techniques are accomplished for the mentioned system and also for an atomic force microscope as the second case study in order to show the performance of the proposed controllers. Finally, experimental verification has been done by using the suggested terminal sliding mode controller to prove the high precision positioning. (C) 2018 Elsevier Inc. All rights reserved.
机译:在本文中,提出了一种鲁棒滑模控制器和具有有限时间收敛性的基于干扰观察者的终端滑模跟踪控制器,用于稳定功能梯度和均匀纳米束。根据非局部应变梯度理论和Euler-Bernoulli束理论对考虑的纳米束进行建模,并对其施加卡西米尔力。静电致动在系统的控制方程式中被视为控制输入模型。采用Galerkin方法将控制的非线性运动偏微分方程简化为具有二次和三次非线性的非线性常微分方程。鲁棒的滑模控制器设计用于稳定具有不确定参数的纳米束,从而消除了颤振。此外,基于扰动观测器的终端滑模控制器用于在存在外部负载扰动和未知非对称输入饱和度的情况下稳定纳米束,这对于当系统控制输入由于约束而存在约束时非常有用。静电驱动。给出了仿真结果,并针对所提到的系统以及作为第二种案例研究的原子力显微镜对建议的控制技术进行了比较,以显示所提出控制器的性能。最后,通过使用建议的终端滑模控制器进行了实验验证,以证明高精度定位。 (C)2018 Elsevier Inc.保留所有权利。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号