Alkyl Polyglucosides as Components of Water Based Lubricants

摘要

Water can be used as an ecological lubricant base if it is possible to select additives which can beneficially modify its tribological and corrosion properties. Additionally, those additives should not be harmful to human health and the natural environment. These conditions limit or even eliminate the possibility for the application of the additives used in traditional oil bases as they are insoluble in water and often toxic. Alkyl polyglucosides (APGs) have been suggested as additives improving lubricating properties of water. They are biodegradable and do not have to be recycled. They exhibit surface activity. They produce micelles at low concentration and lyotropic liquid crystals at high concentration. Two types of alkyl polyglucosides differing in alkyl chain lengths and degrees of polymerization were used in this investigation. Tribological tests were carried out using a ball-on-disc T-11 tester. The balls were made of steel, whereas the discs were made of steel, aluminium oxide, zirconium oxide, polyamide and poly(methyl methacrylate). The description of the device and the methods has been given in the literature (Szczerek and Tuszyński in TriboTest 8:273–284, ). The addition of APGs improves the lubricating properties of water. The relative decrease in motion resistance and wear depends both on the type of friction couple and on the kind of alkyl polyglucoside used. The tribological test results obtained were correlated with the activity of APGs measured as wettability of friction couples by their solutions.