首页> 美国卫生研究院文献>Journal of Visualized Experiments : JoVE >Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography
【2h】

Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography

机译:使用X射线显微照相技术在地下条件下对烃储层岩石润湿性进行孔隙度成像和表征

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In situ wettability measurements in hydrocarbon reservoir rocks have only been possible recently. The purpose of this work is to present a protocol to characterize the complex wetting conditions of hydrocarbon reservoir rock using pore-scale three-dimensional X-ray imaging at subsurface conditions. In this work, heterogeneous carbonate reservoir rocks, extracted from a very large producing oil field, have been used to demonstrate the protocol. The rocks are saturated with brine and oil and aged over three weeks at subsurface conditions to replicate the wettability conditions that typically exist in hydrocarbon reservoirs (known as mixed-wettability). After the brine injection, high-resolution three-dimensional images (2 µm/voxel) are acquired and then processed and segmented. To calculate the distribution of the contact angle, which defines the wettability, the following steps are performed. First, fluid-fluid and fluid-rock surfaces are meshed. The surfaces are smoothed to remove voxel artefacts, and in situ contact angles are measured at the three-phase contact line throughout the whole image. The main advantage of this method is its ability to characterize in situ wettability accounting for pore-scale rock properties, such as rock surface roughness, rock chemical composition, and pore size. The in situ wettability is determined rapidly at hundreds of thousands of points. The method is limited by the segmentation accuracy and X-ray image resolution. This protocol could be used to characterize the wettability of other complex rocks saturated with different fluids and at different conditions for a variety of applications. For example, it could help in determining the optimal wettability that could yield an extra oil recovery (i.e., designing brine salinity accordingly to obtain higher oil recovery) and to find the most efficient wetting conditions to trap more CO2 in subsurface formations.
机译:碳氢化合物储层岩石的现场可湿性测量只是最近才有可能。这项工作的目的是提出一种在地下条件下使用孔隙尺度三维X射线成像表征烃类储层岩石复杂润湿条件的方案。在这项工作中,从非常大的生产油田中提取的非均质碳酸盐岩储层岩石已被用来证明该方案。岩石充满了盐水和油,并在地下条件下老化了三周,以复制通常存在于烃类储层中的润湿性条件(称为混合润湿性)。注入盐水后,获取高分辨率三维图像(2 µm /体素),然后进行处理和分割。为了计算定义润湿性的接触角的分布,执行以下步骤。首先,将流体-流体和流体-岩石表面啮合。使表面光滑以去除体素伪影,并在整个图像中的三相接触线上测量原位接触角。该方法的主要优点是能够表征原位润湿性,从而解释了孔隙尺度的岩石特性,例如岩石表面粗糙度,岩石化学成分和孔径。在数十万个点迅速确定了原位润湿性。该方法受到分割精度和X射线图像分辨率的限制。该协议可用于表征其他复杂岩石的润湿性,这些岩石在不同的流体和不同的条件下对于各种应用都是饱和的。例如,它可以帮助确定最佳的润湿性,从而获得额外的采油量(即,相应地设计盐水盐度以获得更高的采油量),并找到最有效的润湿条件,以在地下地层中捕集更多的二氧化碳。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号