ZB45型硬盒包装机组CH补偿烟库的改进

摘要

ZB45硬盒包装机组的CH补偿烟库中,底层的储备烟包与输出转盘模盒内的烟包之间产生频繁摩擦,造成烟包磨损,从而影响卷烟成品质量.为此,采用4个气缸夹紧并提升烟包的方法对CH补偿烟库进行改进.其中由一组气缸控制烟包的夹紧,另一组气缸控制烟包的提升,使补偿烟库底层的烟包与模盒内烟包保持一定的间隙,从而避免了烟包之间的摩擦,磨损烟包数量由改进前的45包/班减少为0,提高了卷烟成品的质量.%The frequent friction between the reserved packet at the bottom layer of CH and the packet in turret model resulted in blurred packet surface and affected finished products' quality.Two pairs of cylinders were added to the CH to clamp and elevate cigarette packet separately.By maintaining a clearance, the friction between the packet at the bottom of CH and the packet in turret model was avoided, the number of blurred packets reduced from 45 to 0 per shift.