基于MATLAB/Simulink异步电机矢量控制系统C代码生成

摘要

随着工业技术的发展,异步电机控制系统的开发流程要求更低的成本和更短的周期,而MATLAB配合TI系列DSP正好为此提供了一个开发平台.本文提出的控制系统开发流程首先通过构建异步电机控制系统仿真模型获得所需控制参数;之后根据所获取的控制参数和外部硬件结构,构建控制系统代码生成模型,生成所需的DSP可执行C代码;最后将生成的可执行代码下载到以TI系列DSP为控制核心的硬件控制系统中进行硬件实验,矫正模型参数并验证生成代码的正确性.%With the development of industrial technology,the development process of the control system of asynchronous motor requires a lower cost and shorter cycle,while the MATLAB with TI series DSP just provides a development platform for it.This paper proposes a control system development process which firstly obtains the required parameters by building asynchronous motor control system simulation model.Then generates the code system through the control parameters which obtained,and generates the DSP executable code.Finally downloads the executable code to the hardware control system to do the experiments.Next corrects the model parameters and verifies the correctness of the code.