首页> 中文期刊> 《南京工业大学学报(自然科学版) 》 >镀Ni废水回收Ni(OH)2在Ni电极材料中的应用

镀Ni废水回收Ni(OH)2在Ni电极材料中的应用

             

摘要

Nickel hydroxide recovered from nickel plating wastewater by chemical precipitation process was used as the electrode material of nickel-hydroxide battery. The factors affecting the battery performance were investigated. The performances of recovered and bought nickel hydroxide were compared. Results showed that the optimum process conditions for nickel electrode preparation were as follows: nickel hydroxide powder of 80% , nickel powder of 12% , acetylene black of 7% ,PTFE solution of 1% in cathode material, and aqueous KOH solution of 5 mol/L. The battery discharge capacity was 185. 04 rnA·h/ g with recovered nickel hydroxide, it was higher than that with the bought one, and the cycle performance was stable at 0. 1C rate.%将化学沉淀法回收电镀Ni废液得到的Ni(OH)2作为镍氢电池的正极材料,研究电极各组分对电池充放电性能的影响,并将回收的Ni(OH)2与购买的Ni(OH)2进行对比.实验结果表明:较优的Ni电极组分配比为m(Ni(OH)2)∶m(Ni粉)∶m(乙炔黑)∶m(60%的聚四氟乙烯乳液)=80∶12∶7∶1,电解液浓度为5 mol/L的KOH溶液.所制备电极中回收Ni(OH)2的放电比容量为185.04 mA·h/g,高于购买的Ni(OH)2的放电比容量,且在0.1C倍率下循环性能稳定.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号