首页> 中文期刊> 《金刚石与磨料磨具工程》 >脆性材料平面磨削温度场的测量及分析

脆性材料平面磨削温度场的测量及分析

         

摘要

磨削温度直接影响砂轮寿命、加工成本和工件质量,一直是磨削加工领域研究加工过程及其本质的重点.获得磨削弧区温度及工件实际的温度场分布是研究磨削热机理的基础.本文采用NEC TH31-110红外热像仪,测量了平面干磨削脆性材料时的热像图,获得了工件整体温度场分布及沿层深的温度分布数据,确定了工件磨削接触区的最高温度及其准确位置.实验结果表明:工件受磨削温度影响较大的区域主要集中在表层0.5 mm深度,实验结果与理论计算值有较好的相关性.%Grinding temperature affects wheel life, processing cost and workpiece quality. How to measure and control grinding temperature is a key problem in studying grinding mechanism. The temperature field in the workpiece was measured using a NEC TH31 -110 infrared imaging system during surface grinding of brittle material. The highest temperature in grinding zone and its location were obtained from the measured image. The test showed that the most influenced zone of workpiece by the grinding heat was within 0. 5 mm depth under the exterior surface. The grinding temperature-rise occurred in exterior surface within 0. 5 mm depth. Experimental data correlated well with the theoretical result.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号