BACKGROUND: Besides general advantages of mesoporous materials, mesoporous titania coatings have a goodbiocompatibility and antibiotic property which are suitable to modify the surfaces of titanium (Ti) and its alloyOBJECTIVE: To compare and analyze the morphology and structure of mesoporous titania coatings and conventional titaniacoatings in order to provide experimental and theoretical basis for the mesoporous titania coatings applying to the biomedicalfieldMETHODS: The template method and non-template method were adopted to prepare the mesoporous titania coatings andconventional titania coatings on the surface of Ti-6AI-4V alloy Then, the surface morphology observation and microstructureanalysis were characterized by scanning electron microscope, fast specific surface area'porosity analyzer, and X-rayRESULTS AND CONCLUSION: It is validated that the stable mesoporous titania coatings have been prepared on the surface of Ti-6AI-4V alloy and this film displayed the characteristics of mesoporous structure possessing large specific surface and pore volume The average pore diameter, specific surface area and pore volume were calculated to be 6 668 0 nm, 124 190 6m2/g and 0 256 470 cm3/g, respectively Mesoporous titania coatings are suited to modify the surface of medical Ti and its alloys.%背景 介孔结构的二氧化钛涂层除了具有一般介孔材料的优点外,还具有很好的生物相容性和独特的抗菌性,并且在钛及钛合金表面很易形成.目的 对介孔诱导型二氧化钛涂层和普通的二氧化钛涂层进行形貌结构分析和比较,为钛合金表面介孔结构二氧化钛涂层在生物医学领域的应用提供实验和理论基础.方法 在Ti-6Al-4V 合金表面采用模板法和非模板法制备介孔诱导型二氧化钛涂层和普通二氧化钛涂层,使用场发射扫描电子显微镜、快速比表面积/孔隙分析仪和X 射线衍射仪对两种二氧化钛涂层的表面形貌结构进行比较分析.结果 与结论 在Ti-6Al-4V 合金表面制备的稳定介孔二氧化钛涂层,其平均介孔孔径、比表面积和孔容分别为6.668 0 nm、124.190 6 m2/g 和0.256 470 cm3/g,具有介孔结构大比表面积和孔容的特点,适合对医用钛及钛合金改性.
展开▼
