首页> 中文期刊> 《中国粉体技术》 >氧化锆喷雾造粒粉末的制备

氧化锆喷雾造粒粉末的制备

         

摘要

为了制备流动性、均匀性好的氧化锆粉末,以氧化钙部分稳定氧化锆为主要原料,采用离心式喷雾造粒干燥机,制备出松装密度为1.945 g/cm3,流动性好且呈球状的氧化锆颗粒.结果表明,均匀稳定性好的氧化锆料浆对制备优良性能的氧化锆颗粒至关重要;喷雾造粒的工艺条件对造粒粉末性能也有较大影响:当雾化器频率为100~110 Hz,进料泵转速为15~20 r/min时,造粒粉末流动性好,颗粒相对均匀,缺陷较少.%To prepare uniform zirconia spherical particles with excellent flowability by spray drying process,CaO partly stabilized ZrO2 was used as the main raw materials.The spherical particles with loose density of 1.945 g/cm3 with excellent flowability were obtained.The results show that suspensions and spray-dried operating conditions have great influence on the properties of zirconia particles.When the atomizer frequency varies from 100 to 110 Hz and the rotate speed of pump varies from 15 to 20r/min,the uniform particles have excellent flowability and little defects.

著录项

  • 来源
    《中国粉体技术》 |2013年第3期|55-57|共3页
  • 作者单位

    中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室,河南洛阳471039;

    中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室,河南洛阳471039;

    中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室,河南洛阳471039;

    中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室,河南洛阳471039;

    中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室,河南洛阳471039;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 生产过程与设备;
  • 关键词

    喷雾造粒; 工艺条件; 松装密度;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号