Development of an electrochemical reactor for the aqueous phase destruction of chlorinated hydrocarbons.

摘要

A cylindrical electrochemical reactor with a 3 in diameter copper or nickel metal foam cathode and a concentric carbon cloth anode was used to destroy aqueous phase carbon tetrachloride (CT). The results show that a high CT conversion can be achieved in regions of the cathode near the anode, but a low CT conversion is obtained in the region around the center of the cathode. This CT conversion distribution in the radial current-conducting direction suggests that a portion of the cathode worked inefficiently even though the overall CT conversion is still adequate. Further research by changing the solution pH and conductivity suggests that the radial conversion distribution is due to radial variations in cathode surface availability. The inherent difficulties that these results imply with regards to reactor scale up suggested a new approach to the design. An annular reactor, consisting of a thin (3.2 mm) nickel foam cathode wrapped around an inert Plexiglas core and separated for an external concentric anode by a semi-permeable membrane was adopted. Under compatible operating conditions, the annular reactor showed a high overall effluent CT conversion. However, experiments at low pH (2.25) yielded higher conversions than under neutral pH conditions. This result suggests that CT conversion is favored by a relatively high proton concentration. This reactor can be simulated by a one dimensional model. The annular reactor was used to destroy PCE and TCE successfully, which suggests that this technique can be employed to treat groundwater contaminated with complex mixtures of chlorinated hydrocarbons.;A multi-layer reactor based on the principle of the annular reactor was developed as an option for the scale up of the system. This reactor exhibited high and uniform radial CT conversion.