首页> 外文学位 >Ionic Liquids as Solvents for Catalytic Conversion of Lignocellulosic Feedstocks.
【24h】

Ionic Liquids as Solvents for Catalytic Conversion of Lignocellulosic Feedstocks.

机译:离子液体作为木质纤维素原料催化转化的溶剂。

获取原文
获取原文并翻译 | 示例

摘要

The primary focus of this work was to understand the kinetics of both biomass deconstruction and secondary sugar chemistry in ionic liquids. Biomass is a complex collection of molecules that consists of three primary components, cellulose, hemicellulose, and lignin. Since cellulose is the primary component, accounting for roughly 45 wt% of the raw biomass on a dry basis, initial studies aimed to understand the hydrolysis of dissolved cellulose to its sugar residue glucose. Using microcrystalline Avicel cellulose as a model, the rate laws and activation energies of cellulose hydrolysis and glucose dehydration were determined in the ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]). No evidence of oligosaccharides was observed, suggesting that hydrolysis occurs preferentially at chain ends and is irreversible. Gradually adding water to the reaction solution, so as not to precipitate cellulose but also limit the secondary dehydration of the resulting glucose to 5-hydroxymethyl furfural (5-HMF), significantly increased glucose yield and limited production of degradation products (humins).;While understanding the reactivity of model compounds is important to the development of biomass conversion technologies, it is critical to understand how the components of biomass react in their native form. An investigation was carried out to compare the reactivity of cellulose and hemicellulose model compounds to both pretreated and miscanthus grass in 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]). Activation energies of model compounds were compared with the native component in raw biomass. Significant rate decreases in hydrolysis of the cellulosic and hemicellulosic components in raw biomass compared to Avicel and Xylan from Birchwood were attributed to the interaction of lignin with the biopolymers in raw biomass. However, reaction of two pretreated substrates with varying degrees of delignification showed that the presence of lignin did not have a detrimental effect on hydrolysis, but instead suggested that breaking the raw biomass macrostructures is the key to improving hydrolysis of the biopolymers. Gradual water addition strategies further improved saccharine yield, but left the cellulosic component incompletely hydrolyzed. This unhydrolyzed cellulosic component could be further converted by varying the temperature, acid concentration, or performing a second hydrolysis on the reactor residue.;We investigated the selective conversion of glucose to 5-HMF in ionic liquids using metal chlorides. Chromium chloride, CrCl2, has been proposed to isomerize glucose to fructose, which is readily dehydrated to 5-HMF in imidazolium chloride ionic liquids without an added catalyst. We began by studying the kinetics of fructose dehydration in [Emim][Cl] and investigating the effects of CrCl2 on the dehydration to 5-HMF. Then the kinetics of glucose isomerization to fructose using CrCl2 were characterized and compared to the rate and activation energy for fructose dehydration. Using the data for fructose, a model for the kinetics of fructose dehydration and isomerization in the presence of CrCl2 was developed. When the model was applied to glucose, it failed to describe the large conversion of glucose and small yields of 5-HMF in the initial reaction period.;Finally, we conducted in-situ 13C NMR experiments to characterize the intermediates and products formed and to understand the effect of the ionic liquid solvent on glucose dehydration to 5-HMF catalyzed by metal chlorides in [Emim][Cl]. Compared to H2O, glucose dissolved in [Emim][Cl] exhibited higher equilibrium concentrations of the furanose and acyclic isomers of glucose. These isomers were observed to undergo dehydration more rapidly than the pyranose isomers of glucose. The rate of anomerization was also found to be faster in [Emim][Cl], a process that may facilitate ring opening in several proposed mechanisms for glucose dehydration. In situ catalytic studies were conducted using WCl6, which concluded that fructose is not formed as the reactive intermediate, but rather glucose first undergoes partial dehydration, before it is transformed from its unreactive aldose form to the more reactive ketose form. Using these observations, combined with studies of glucose dehydration catalyzed by H2SO4 several mechanisms were proposed to explain the progressive dehydration of glucose to 5-HMF using metal chlorides. (Abstract shortened by UMI.).
机译:这项工作的主要重点是了解离子液体中生物质解构和二级糖化学的动力学。生物质是一个复杂的分子集合,由三个主要成分组成:纤维素,半纤维素和木质素。由于纤维素是主要成分,以干基计约占原始生物质的45 wt%,因此初步研究旨在了解溶解的纤维素水解为糖残基葡萄糖的过程。以微晶Avicel纤维素为模型,测定离子液体1-丁基-3-甲基咪唑鎓氯化物([Bmim] [Cl])中纤维素水解和葡萄糖脱水的速率规律和活化能。没有观察到寡糖的迹象,这表明水解优先发生在链端并且是不可逆的。逐渐向反应溶液中加入水,以免沉淀纤维素,但也限制了所得葡萄糖向5-羟甲基糠醛(5-HMF)的二次脱水,显着提高了葡萄糖产量,限制了降解产物(腐殖质)的产生。虽然了解模型化合物的反应性对于生物质转化技术的发展很重要,但了解生物质组分如何以其天然形式发生反应至关重要。进行了一项研究,以比较纤维素和半纤维素模型化合物在1-乙基-3-甲基咪唑鎓氯化物([Emim] [Cl])中对预处理草皮和猕猴桃草的反应性。将模型化合物的活化能与原始生物质中的天然成分进行了比较。与来自Birchwood的Avicel和Xy​​lan相比,原始生物质中纤维素和半纤维素成分的水解速率显着下降,这归因于木质素与原始生物质中生物聚合物的相互作用。然而,两种经过预处理的底物具有不同的脱木素度的反应表明,木质素的存在对水解没有不利影响,而是表明破坏原始生物质宏观结构是改善生物聚合物水解的关键。逐步添加水的策略进一步提高了糖精的产量,但纤维素成分未完全水解。可以通过改变温度,酸浓度或对反应器残渣进行第二次水解来进一步转化这种未水解的纤维素组分。我们研究了使用金属氯化物在离子液体中将葡萄糖选择性转化为5-HMF的方法。已经提出氯化铬CrCl 2将葡萄糖异构化为果糖,其在不添加催化剂的情况下易于在氯化咪唑鎓离子液体中脱水成5-HMF。我们首先研究了[Emim] [Cl]中果糖脱水的动力学,并研究了CrCl2对脱水成5-HMF的影响。然后表征了使用CrCl2将葡萄糖异构化为果糖的动力学,并将其与果糖脱水的速率和活化能进行了比较。利用果糖数据,建立了在CrCl2存在下果糖脱水和异构化动力学的模型。当将该模型应用于葡萄糖时,它无法描述初始反应期间葡萄糖的大转化率和5-HMF的小产率。最后,我们进行了原位13 C NMR实验以表征中间体和生成的产物,并了解离子液体溶剂对[Emim] [Cl]中金属氯化物催化的葡萄糖脱水生成5-HMF的影响。与H2O相比,溶解在[Emim] [Cl]中的葡萄糖表现出较高的葡萄糖呋喃糖和无环异构体平衡浓度。观察到这些异构体比葡萄糖的吡喃糖异构体脱水更快。还发现[Emim] [Cl]中的异化速率更快,该过程可以促进葡萄糖脱水的几种提议机理中的开环。使用WCl6进行的原位催化研究表明,果糖不是作为反应性中间体形成的,而是葡萄糖首先经历了部分脱水,然后才从非反应性醛糖形式转变为反应性更强的酮糖形式。利用这些观察结果,结合对H2SO4催化的葡萄糖脱水的研究,提出了几种机制来解释使用金属氯化物将葡萄糖逐步脱水成5-HMF的机理。 (摘要由UMI缩短。)。

著录项

  • 作者

    Dee, Sean Joseph.;

  • 作者单位

    University of California, Berkeley.;

  • 授予单位 University of California, Berkeley.;
  • 学科 Engineering Chemical.
  • 学位 Ph.D.
  • 年度 2012
  • 页码 115 p.
  • 总页数 115
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号