首页> 外文学位 >The Taylor-Couette problem for flow in a deformable cylinder .
【24h】

The Taylor-Couette problem for flow in a deformable cylinder .

机译:变形圆柱体中的泰勒-库埃特问题。

获取原文
获取原文并翻译 | 示例

摘要

The Taylor-Couette problem is a fundamental example in bifurcation theory and hydrodynamic stability, and has been the subject of over 1500 papers. This thesis treats a generalization of this problem in which the rigid outer cylinder is replaced by a deformable (nonlinearly viscoelastic) cylinder whose motion is not prescribed, but responds to the forces exerted on it by the moving liquid. The inner cylinder is rigid and rotates at a prescribed angular velocity, driving the liquid, which in turn drives the deformable cylinder. The motion of the outer cylinder is governed by a geometrically exact theory of shells and the motion of the liquid by the Navier-Stokes equations, where the domain occupied by the liquid depends on the deformation of the outer cylinder.; This thesis treats the stability of Couette flow, a steady solution of the nonlinear fluid-solid system that can be found analytically, first with respect to perturbations that are independent of z, then with respect to axisymmetic perturbations. The linearized stability problems are governed by quadratic eigenvalue problems. For each problem, this thesis gives a detailed characterization of how the spectrum of the linearized operator depends on the control parameter, which is the angular velocity of the rigid inner cylinder. In particular, there are theorems detailing how the eigenvalues cross the imaginary axis. The spectrum is computed by a mixed Fourier-finite element method. The spectral properties determine the conditions under which the system loses its linearized stability. The same conditions support theorems on nonlinear stability. New physical phenomena are discovered that are not observed in the classical Taylor-Couette problem. The fluid-solid interaction models that are developed have applications in structural engineering and human physiology.
机译:泰勒-库埃特问题是分叉理论和流体力学稳定性的基本示例,并且已成为1500多篇论文的主题。本论文解决了这个问题的一般性问题,其中用一个可变形的(非线性粘弹性)圆柱体代替了刚性的外圆柱体,该圆柱体的运动没有规定,但能响应运动液体施加在其上的力。内圆柱体是刚性的,并以规定的角速度旋转,从而驱动液体,进而驱动可变形圆柱体。外筒的运动由壳的几何精确理论控制,液体的运动由Navier-Stokes方程控制,其中液体占据的区域取决于外筒的变形。本文研究了库埃特流的稳定性,该库埃特流是非线性流固系统的稳定解,可以从解析上找到它,首先是关于与z无关的扰动,然后是关于轴对称扰动。线性化稳定性问题由二次特征值问题控制。对于每个问题,本论文详细描述了线性化算子的频谱如何取决于控制参数,即刚性内圆柱的角速度。特别是,有定理详细说明了特征值如何与虚轴交叉。通过混合傅立叶有限元法计算光谱。光谱特性决定了系统失去线性稳定性的条件。相同条件支持非线性稳定性定理。发现了新的物理现象,这在经典的泰勒-库埃特问题中没有观察到。开发的流固耦合模型在结构工程和人类生理学中具有应用。

著录项

  • 作者

    Bourne, David.;

  • 作者单位

    University of Maryland, College Park.$bMathematics.;

  • 授予单位 University of Maryland, College Park.$bMathematics.;
  • 学科 Mathematics.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 219 p.
  • 总页数 219
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 数学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号