首页> 外文会议>Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE >Silicon microholes array fabricated by femtosecond laser pulses directly writing assisted with further electrochemical etching
【24h】

Silicon microholes array fabricated by femtosecond laser pulses directly writing assisted with further electrochemical etching

机译:飞秒激光脉冲直接写入辅助的硅微孔阵列,进一步进行电化学蚀刻

获取原文
获取原文并翻译 | 示例

摘要

Silicon microholes array have been fabricated using femtosecond laser directly writing followed by electrochemical etching in a hydrofluoric acid (HF) and the isopropyl alcohol ((CH3)2CHOH) solution. Firstly, the micro size scratches array were directly written on a surface of the n-type, 1-5 Ωcm, Si(100) wafer by using the femtosecond laser pulses. Shallow micro holes array could be obtained on the wafer surface. Then, the as-fabricated sample with shallow micro holes array was further etched electrochemically in HF and (CH3)2CHOH solution. During this step, the depth of the shallow microholes array could be greatly enlarged because of the focusing effect by the prefabricated microholes array. Finally, optical characteristics of the fabricated silicon microholes (SiMHs) array at different stages demonstrate that the reflections of the fabricated samples have been greatly reduced compared to that of a silicon wafer. Our method suggests the effectiveness of SiMHs array on a silicon wafer for obtaining the enhanced optical absorption and potential application for fabricating a special radial p-n junction solar cell.
机译:硅微孔阵列已使用飞秒激光直接写入,然后在氢氟酸(HF)和异丙醇((CH3)2CHOH)溶液中进行电化学蚀刻制成。首先,使用飞秒激光脉冲将微米尺寸的划痕阵列直接写入1-5ΩcmSi(100)n型晶片的表面。可以在晶片表面上获得浅的微孔阵列。然后,将制成的带有浅微孔阵列的样品在HF和(CH3)2CHOH溶液中进行电化学蚀刻。在此步骤中,由于预制的微孔阵列的聚焦作用,浅微孔阵列的深度可以大大增加。最后,在不同阶段制造的硅微孔(SiMH)阵列的光学特性表明,与硅片相比,制造的样品的反射已大大降低。我们的方法表明,硅晶片上的SiMHs阵列对于获得增强的光吸收和制造特殊的径向p-n结太阳能电池的潜在应用具有有效性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号