Notional Piles for Generalized Foundation Modeling Based on the Novak Procedure

摘要

The "Notional Pile" formulation is developed for modeling a group of piles in a foundation. It is a new procedure for foundation modeling for dynamic analysis in conformance with ACI 351.3R. It is an augmentation of the well-known Novak procedure. Foundation stiffness is represented as a set of notional pile elements. This differs from conventional procedures in which the pile group stiffness is represented by a set of springs lumped at one point. With notional piles and finite element modeling of the cap, flexible-cap modes of vibration can be extracted. With conventional procedures, only lower-frequency rigid body modes can be extracted. Notional piles distribute stiffness more realistically and enable cap-pile interaction. A specific case is used to illustrate the new procedure. For that case, the cap did not have a regular distribution of mass or stiffness. Dynamic loads were applied with considerable eccentricity, at multiple locations and with multiple frequencies. Notional piles accommodated these irregularities. The notional pile formulation was validated by comparing measured to computed foundation responses. The comparison was good but not great. The foundation was to be reconfigured for new machinery. The retrofit design was modeled using notional piles. Responses were computed and compared to applicable limits.