首页> 外文会议>International Conference on Nanomaterials: Science, Engineering and Technology >Effect of reaction conditions in the catalytic esterification of palm fatty acid distillate to produce fatty acid methyl ester
【24h】

Effect of reaction conditions in the catalytic esterification of palm fatty acid distillate to produce fatty acid methyl ester

机译:反应条件在棕榈脂肪酸催化酯化中的影响,馏出物生产脂肪酸甲酯

获取原文

摘要

Biodiesel or fatty acid methyl ester (FAME) obtained via esterification process is an alternative for industrial and transportation fuel. In this study, chromium-titanium mixed oxides catalyst synthesized via sol-gel method was used to catalyse the esterification of palm fatty acid distillate (PFAD) to produce FAME. Esterification was conducted in a batch reactor. The effects of reaction temperature, methanol to PFAD molar ratio, reaction time and reusability of catalyst were studied. Reaction conditions yielding the best performance of 89% FAME content were reaction temperature of 160°C, methanol to PFAD molar ratio of 3:1 and reaction time of 3 h. The catalyst can be reused for 3 times with 20% performance reduction between the first run and the third run. The results revealed that the mixed oxides of Cr-Ti is a potential heterogeneous catalyst for use in the esterification of high acid value feedstock of PFAD.
机译:通过酯化过程获得的生物柴油或脂肪酸甲酯(FAME)是工业和运输燃料的替代方案。 在该研究中,通过溶胶 - 凝胶法合成的铬 - 钛混合氧化物催化剂催化棕榈脂肪酸馏分(PFAD)的酯化以产生名称。 酯化在批量反应器中进行。 研究了反应温度,甲醇对PFAD摩尔比的影响,催化剂的反应时间和可重用性。 产生89%的最佳性能的反应条件是160℃的反应温度,甲醇至pFAD摩尔比为3:1和3小时的反应时间。 催化剂可以重复使用3次,在第一次运行和第三次运行之间的性能降低20%。 结果表明,Cr-Ti的混合氧化物是用于磷脂高酸值原料酯化的潜在的异质催化剂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号