Design of Mussel Peeler Machine Egronomic

摘要

Indonesia is a maritime state. A country in which most of the territory is oceanic. Mussel is one of the most abundant commodities of seafood and The demand of it is high. The mussel extraction process is stilldone in manual way in indonesia, It is not only waste alot of time but it is also dangerous for the workers The design of this machine is conducted by Static bike modification atau by modifying a static bike ergonomic. Therefore, it is environmentally safe in its peeling process. The research aims to make the design of mussel Peeler machine, and testing mussel to find out the capacity and effectiveness of the machine.. The research methods used are the identification of problems, machinery design and chains and machine trials. The resulting engine design consists of three main parts namely the axle as a peeler, the dual-chain transmission as a mobilizer, and two furnaces as a machine house and a boiling medium. The results of this study were quantitatively carried out with 1.5 kg, 2 kg, and 2.5 kg test materials to determine the maximum capacity of the tool, as well as further trials with the weight of the 1.5 kg test material to determine the effectiveness of the tool. The conclusion from the results of the trial is that the maximum capacity is 2.5 kg and is most effectively carried out at the weight of the 1.5 kg test material with 11 minutes heating or boiling time. Ergonomically reviewed, this tool is better than manual stripping. Because conventional stripping has tumed into a paddle system, so as to minimize the occurrence of lower back pain and overcome hand injuries.