首页> 外文会议>International Conference on Machining, Materials and Mechanical Technologies >Non-linear analysis and modeling of the structure with bolted joints
【24h】

Non-linear analysis and modeling of the structure with bolted joints

机译:用螺栓接头结构的非线性分析和建模

获取原文

摘要

In this study, a non-linear finite element model for a simplified single-bolted joint structure model is built. Static analysis on the structure under different shear force and pretension effect is done, and the non-linear contact behavior is analyzed. Through comparing datum, it is found that interface area of each bolted joint region can be described an annular region around bolt hole, whose outer radius has increased by 85% compared with radius of bolt hole. Also, the frequency responses of the multi-bolted joint structure under sinusoidal excitation are investigated. Simulation results show that the resonance regions basically remain unchanged in different pretension effect and the largest amplitude will increase with the increasing preloads. Finally, the vibration experiments are conducted. Interface nonlinear affect dynamic stiffness considerably. The test results illustrate that dynamic behaviors of bolted joint agree with the simulation results and the proposed non-linear contact model was reasonable.
机译:在该研究中,构建了一种简化的单螺栓连接结构模型的非线性有限元模型。完成了不同剪切力和预张力效果下的结构的静态分析,分析了非线性接触行为。通过比较数据,发现每个螺栓接合区域的接口区域可以描述围绕螺栓孔的环形区域,其与螺栓孔的半径相比,外半径增加了85%。而且,研究了正弦激发下的多螺栓连接结构的频率响应。仿真结果表明,谐振区基本上在不同的预张力效果中保持不变,并且随着预载荷的增加,最大振幅将增加。最后,进行振动实验。接口非线性大幅影响动态刚度。测试结果说明了螺栓连接的动态行为与模拟结果一致,所提出的非线性接触型号合理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号