Waterproofing gels; Injection screens; High temperature;
机译:根据公牛的不归率估算潜在的生育力:在精子穿透试验中使用聚丙烯酰胺凝胶代替宫颈粘液
机译:基于苯乙烯丙烯酸酯共聚物和水泥的节能型冷白色屋顶涂料的防水研究-第一部分:光学性能,估计的冷却效果以及污垢和加速暴露后的相关性能
机译:高温加热试验后辐照金属燃料对微观结构和共晶渗透率的测量
机译:测试防水凝胶渗透率,同时暴露于较高温度
机译:浓缩氢氧化钠在高温下镍,铬,铁的电化学研究及镍-铬-铁合金的快速应变速率试验。
机译:用于利多卡因皮肤应用的纳米结构脂质载体凝胶:皮肤渗透测试方法的比较
机译:研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求,测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是,在这项研究中,掺入钢纤维对耐火性的影响。实验结果表明,耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时,80-100MPa的设计强度为35MPa或高性能混凝土(HPC)的正常强度混凝土(NSC)不会击落。然而,当HPC含有1体积的钢纤维的百分比时,爆炸性剥落发生在300℃。超高性能混凝土(UHPC)的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
机译:运动和暴露于适度温暖和热空气温度期间的体温和消防员合奏温度