首页> 外文会议>International Conference on Mechanochemistry and Mechanical Alloying(INCOME) >THE EFFECT OF MECHANICAL TREATMENT INTENSITY ON COMPONENT COMPOSITION OF HIGHLY PARAFFINIC CRUDE
【24h】

THE EFFECT OF MECHANICAL TREATMENT INTENSITY ON COMPONENT COMPOSITION OF HIGHLY PARAFFINIC CRUDE

机译:机械处理强度对高石蜡粗产物组分组成的影响

获取原文

摘要

Partial destruction of crude hydrocarbons is known to occur during mechanochemical treatment however the effect of such treatment intensity on the conversion of hydrocarbons in highly paraffinic crude has not been studied yet. It was the aim of the present investigation. Crudes recovered from Stolbovoye (content of paraffin waxes 6.9 wt. %) and Zuunbayan (content of paraffin waxes 16 wt. %) deposits were used as the objects under study. Mechanochemical treatment of crudes was carried out using installation AGO-2M. Steel balls 8 mm in diameter were used as grinding bodies. The intensity of mechanical treatment was specified by rotational speed of the reactor; the experiments were carried out at grinding body acceleration of 300, 600 and 1000 m/s2 and time of mechanical treatment was 10 minutes. In all experiments one fixed no formation of gaseous hydrocarbons.
机译:已知在机械化学治疗期间发生粗烃的部分破坏然而,这种治疗强度对高级石蜡粗粗产物在高度石蜡碳中转化的影响尚未研究。这是目前调查的目标。从Stolbovoye(石蜡6.9重量%)和Zuunbayan(石蜡蜡16重量%)的含量回收的钻石用作研究的目的。使用安装前进行钻石的机械化学处理 - 2M。直径8毫米的钢球用作砂体。通过反应器的旋转速度规定了机械处理的强度;实验在研磨体加速下进行300,600和1000 m / s2,并且机械处理时间为10分钟。在所有实验中,一个固定的不形成气态烃。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号