Design for Board Trace Reliability of WLCSP under Drop Test

摘要

Through an aggressive product development program which includes experiment and simulation, Amkor has developed the next level of WLCSP (CSP~(nl)), a product which exhibits superior board level reliability when subjected to drop impact, a strong requirement for portable electronics. Failure mechanism of WLCSP under drop test has been established. Depending on type of WLCSP and test board design, 3 primary failure modes can be observed, i.e. copper (Cu) board trace crack, Cu RDL (Redistribution Layer) vertical crack and Cu/UBM (Under Bump Metallization) delamination. CSP~(nl) can exhibit distinct failure modes under different test board and/or CSP~(nl) designs, resulting in a vast difference in drop test lifetimes. The primary failure mode is shifted whenever the weakest link is removed through design improvement. This paper will focus on detailed analysis of copper board trace crack under drop test, using an integrated approach of testing, failure analysis, material characterization and modeling. Board design guidelines are formulated to understand the effects of I/O position, board trace routing direction, board trace width, tear drop design, PCB pad size, stack-up thickness, and alloy materials on board trace reliability. Comparison is also made on possible impact on Cu RDL reliability.