首页> 外文会议>China International Conference on High Performance Ceramics >Dielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma Sintering
【24h】

Dielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma Sintering

机译:火花等离子体烧结制备氮化硼 - 氮化铝复合材料的介电性能

获取原文

摘要

In this study, hexagonal Boron Nitride-Aluminium Nitride composites were prepared by spark pjasma sintering at 1700 deg C for 4 min under the pressure of 25 MPa, varying the amount of BN from 0 to 30 wt. percent. The dielectric constants and losses of the samples were measured from 100 Hz to 1 MHz at room temperature, and the results show that with the increment of BN content, the dielectric constants and losses of A1N-BN composites decrease. When the BN content is 20 wt. percent, the dielectric constant and loss of the composites at 1 MHz are 6.18, 2.1 X 10~(-3) respectively.
机译:在该研究中,通过在25MPa的压力下在1700℃下火花Pjasma烧结在1700℃下进行六边形氮化硼 - 氮化铝复合材料,改变0至30重量%的BN量。百分。在室温下从100Hz至1MHz测量样品的介电常数和损失,结果表明,随着BN含量的增量,A1N-BN复合材料的介电常数和损耗降低。当BN含量为20重量%时。百分比,1MHz的复合材料的介电常数和损失分别为6.18,2.1×10〜(-3)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号