...
首页> 外文期刊>Key Engineering Materials >Dielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma Sintering
【24h】

Dielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma Sintering

机译:放电等离子体烧结制备氮化硼-氮化铝复合材料的介电性能

获取原文
获取原文并翻译 | 示例

摘要

In this study, hexagonal Boron Nitride-Aluminium Nitride composites were prepared by spark plasma sintering at 1700℃ for 4 min under the pressure of 25 MPa, varying the amount of BN from 0 to 30 wt.%. The dielectric constants and losses of the samples were measured from 100 Hz to 1 MHz at room temperature, and the results show that with the increment of BN content, the dielectric constants and losses of AlN-BN composites decrease. When the BN content is 20 wt.%, the dielectric constant and loss of the composites at 1 MHz are 6.18, 2.1 x 10~(-3) respectively.
机译:在这项研究中,六方氮化硼-氮化铝复合材料是通过在25 MPa的压力下于1700℃下进行4分钟的火花等离子体烧结制备的,BN的含量从0到30 wt。%不等。在室温下从100 Hz到1 MHz测量样品的介电常数和损耗,结果表明,随着BN含量的增加,AlN-BN复合材料的介电常数和损耗降低。当BN含量为20wt。%时,复合材料在1MHz下的介电常数和损耗分别为6.18、2.1×10〜(-3)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号