首页> 外文会议>Symposium on Amorphous and Nanocrystalline Silicon Science and Technology >Materials and Interface Optimization of Heterojunction Silicon (HIT) Solar Cells Using In Situ Real-Time Spectroscopic Ellipsometry
【24h】

Materials and Interface Optimization of Heterojunction Silicon (HIT) Solar Cells Using In Situ Real-Time Spectroscopic Ellipsometry

机译:异质结硅(击中)太阳能电池的材料与界面优化使用原位实时光谱椭圆形测量法

获取原文

摘要

We have applied real-time spectroscopic ellipsometry (RTSE) as both an in-situ diagnostic and post-growth analysis tool for hydrogenated amorphous silicon (a-Si:H)/crystalline silicon (c-Si) heterojunction with intrinsic thin-layer (HIT) solar cells grown by hot-wire chemical vapor deposition. RTSE enables precise thickness control of the 5 to 25 nm layers used in these devices, as well as monitoring crystallinity and surface roughness in real time. Utilizing RTSE feedback, but without extensive optimization, we have achieved a photovoltaic energy conversion efficiency of 14.1% on an Al-backed p-type Czochralski c-Si wafer coated with thin i and n layers on the front. Open-circuit voltages above 620 mV indicate effective passivation of the c-Si surface by the a-Si:H intrinsic layer. Lifetime measurements using resonant coupled photoconductive decay indicate that surface recombination velocities can approach 1 cm/s. RTSE and transmission electron microscopy show that the intrinsic a-Si:H i-layers grow as a mixture of amorphous and nano-crystalline silicon.
机译:我们已经应用了实时光谱椭圆形(RTSE)作为原位诊断和后生长后的氢化非晶硅(A-Si:H)/晶体硅(C-Si)异质结具有本征薄层(击中)通过热线化学气相沉积种植的太阳能电池。 RTSE使得能够在这些装置中使用的5至25nm层的精确控制,以及实时监测结晶度和表面粗糙度。利用RTSE反馈,但没有广泛的优化,我们在涂有薄I和N层的AL背衬型Czochralski C-Si晶片上实现了14.1%的光伏能量转换效率。 620 mV以上的开路电压表示C-Si表面通过A-Si:H内在层的有效钝化。使用谐振耦合光电导衰减的寿命测量表明表面重组速度可以接近1cm / s。 RTSE和透射电子显微镜表明,本征A-Si:H I层生长为无定形和纳米晶体硅的混合物。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号