COMPARISON OF THERMAL TEST USING SLICE MODEL AND HALF-SCALE MODEL OF SHIPPING PACKAGE

摘要

KORAD-B/II shipping packages are used to transport C4 concrete packages that are temporarily stored at the HANUL nuclear power plant. These packages must therefore satisfy the requirements prescribed in the Korea Nuclear Safety Security Commission Act 2014-50, the IAEA Safety Standards No. SSR-6, and US 10 CFR Part 71. These regulatory guidelines classify a KORAD-B/II shipping package as a Type B package, and state that this type of package must be able to withstand a temperature of 800 °C for a period of 30 min. It is desirable to conduct a test using a full-scale model of a shipping package when performing tests to evaluate its integrity. However, it is costly to perform a test using a full-scale model. Therefore, to evaluate the thermal integrity of a KORAD-B/II shipping package, thermal tests were conducted using a slice model. For comparison purposes, a thermal test was also carried out using a half-scale model. In the first thermal test using a slice model, the maximum surface temperature of the cask body was higher than the permitted maximum temperature limits owing to incomplete combustion. In the second thermal test using a slice model and in the thermal test using a half-scale model, the maximum temperature of the cask body was lower than the permitted maximum temperature limit. Therefore, the thermal integrity of the KORAD-B/II shipping package could be considered to be maintained. The temperature results from the thermal test using a slice model were higher than those of the thermal test using a half-scale model. Therefore, the effect of flame on a single-layer shipping package without neutron shielding, such as the KORAD-B/II shipping package, seems to be affected by the reduction in the time rather than the size reduction