首页> 外文会议>SPIE Conference on Solid State Lasers >Deterministic single shot and multiple shots bulk damagethresholds for doped and undoped, crystalline and ceramic YAG
【24h】

Deterministic single shot and multiple shots bulk damagethresholds for doped and undoped, crystalline and ceramic YAG

机译:确定性单次射击和多次射击散装船只,用于掺杂和未掺杂,结晶和陶瓷YAG

获取原文

摘要

We used 9.9-ns, single-longitudinal-mode, TEM_(00) pulses tightly focused to an 8-micron radius spot to measure single-shot and multiple-shot damage thresholds of pure and Nddoped ceramic Yttrium Aluminum Garnet (YAG), and of pure, Nd-doped, Cr-doped, and Yb-doped crystalline YAG. By tightly focusing the laser beam, we kept the damage threshold powers below the SBS threshold, and minimized the effect of self focusing. The size of the focus spot was measured using surface third harmonic generation.We found both single-shot and multiple-shot damage thresholds to be deterministic. At the single-shot damage threshold in YAG, breakdown always occurs on the trailing edge of the laser pulse. However, for multiple-shot damage threshold, breakdown occurs at the peak of the n~(th) laser pulse.Our measured damage thresholds for doped and undoped, ceramic and crystalline YAG range from 1.1 to 2.2 kJ/cm~2. We also report some damage morphologies in crystalline YAG.
机译:我们使用9.9-ns,单纵模,tem_(00)脉冲紧密专注于8微米半径点,测量单射和多射损伤的纯和nddoped陶瓷钇铝石榴石(YAG),以及纯,Nd掺杂,Cr掺杂和Yb掺杂的结晶yag。通过紧密聚焦激光束,我们将损坏阈值功率保持在SBS阈值以下,并最大限度地减少了自聚焦的效果。使用表面三次谐波生成测量聚焦点的大小。我们发现单次和多次射击损伤阈值都是确定性的。在YAG的单次损伤阈值下,故障始终发生在激光脉冲的后缘上。然而,对于多次射击损伤阈值,在N〜(Th)激光脉冲的峰值处发生击穿。测量掺杂和未掺杂,陶瓷和结晶YAG的损伤阈值范围为1.1至2.2kJ / cm〜2。我们还报告了结晶YAG中的一些损伤形态。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号