首页> 外文会议>SPIE Conference on High-power Diode Laser Technology and Applications >Highly Reliable 637-639 nm Red High-Power LDs for Displays
【24h】

Highly Reliable 637-639 nm Red High-Power LDs for Displays

机译:高度可靠的637-639 NM红色大功率LDS供展示

获取原文

摘要

Higher power laser diodes (LDs) with a wavelength of 637-639nm are strongly demanded as a light source of display applications because luminosity factor of laser light is relatively high. In order to realize reliable high power operation, we have optimized LD structure, focusing on improvement of power saturation and sudden degradation. As a result, 40μm-wide broad-area (BA) LDs with window-mirror structure have been designed. We fabricated two kinds of single emitter LDs of 1.0mm cavity and 1.5mm cavity. The single LD is installed in conventional Φ5.6 mm TO-CAN package. The 1.0mm LD showed very high wall plug efficiency (WPE) of 33% at 25°C (23% at 45°C) in the power range of around 300mW (30 lm). High output power of 600mW (60 lm) is realized by the 1.5mm LD. Both LDs have operated for over 1,000 hours without any degradation. Estimated mean time to failure (MTTF) is 10,000 hours. In addition, we fabricated an array LD consisting of 20 emitters (BA-LD structure), which shows reliable CW operation of 8W (at junction temperature of 50°C) for 10,000 hours.
机译:波长为637-639nm的较高功率激光二极管(LDS)被强烈要求作为显示应用的光源,因为激光的光度因子相对较高。为了实现可靠的高功率操作,我们已经优化了LD结构,专注于提高功率饱和度和突然降解。结果,设计了具有窗框结构的40μm宽的宽面积(BA)LD。我们制造了两种单一发射器LDS为1.0mm腔和1.5mm腔。单个LD安装在常规Φ5.6mm到可封装中。 1.0mm LD在功率范围为约300mW(30升)的功率范围内,在25°C(45°C时,33%)显示出非常高的壁插效率(WPE)。高输出功率为600MW(60Lm),由1.5mm LD实现。两个LDS在1,000小时内运营,没有任何降级。估计失败的平均时间(MTTF)是10,000小时。此外,我们制造了由20个发射器(BA-LD结构)组成的阵列LD,其显示8W的可靠性CW操作(在50°C的结50℃下)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号