首页> 外文会议>2011 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring >Unsupported Ni-Mo Composite Oxide Catalysts Prepared by Sol-gel Method for Hydrodeoxygenation
【24h】

Unsupported Ni-Mo Composite Oxide Catalysts Prepared by Sol-gel Method for Hydrodeoxygenation

机译:溶胶-凝胶法加氢脱氧的无载体Ni-Mo复合氧化物催化剂

获取原文

摘要

Unsupported Ni-Mo composite oxide catalysts were successfully prepared by the sol-gel method with citric acid as a complex agent. The catalysts were characterized using N2adsorption-desorption, X-ray diffraction (XRD) and temperature programmed desorption (NH3-TPD). The effects of Mo/Ni molar ratio and reaction temperature on the hydrodeoxygenation activity of the catalysts were investigated emphatically using acetic acid and phenol as probe compounds. The results showed that the catalysts prepared by the sol-gel method can possess higher specific surface area and the double mesoporous structure. The ¦Â-NiMoO3 phase determined by XRD was existed in the catalysts. For Mo/Ni molar ratios between 0.0 ~ 0.8, the pore volume, the specific surface area, the medium strong acidity and hydrodeoxygenation activity of the catalyst are not monotonically increasing functions of Mo/Ni ratio. The catalyst with Mo/Ni ratio of 0.6 exhibited the highest hydrodeoxygenation activity. At 0.3MPa, the deoxygenation percentage of the phenol was 99.0% at 210¡æand 99.9% at 270¡æ for the acetic acid, respectively.
机译:以柠檬酸为络合剂,通过溶胶-凝胶法成功制备了无载体的Ni-Mo复合氧化物催化剂。使用N2吸附-脱附,X射线衍射(XRD)和程序升温脱附(NH3-TPD)对催化剂进行了表征。以乙酸和苯酚为探针化合物,重点研究了Mo / Ni摩尔比和反应温度对催化剂加氢脱氧活性的影响。结果表明,溶胶-凝胶法制备的催化剂具有较高的比表面积和双介孔结构。 XRD测定的β-NiMoO3相存在于催化剂中。当Mo / Ni摩尔比在0.0〜0.8之间时,催化剂的孔体积,比表面积,中等强酸度和加氢脱氧活性并不是单调增加Mo / Ni比的作用。 Mo / Ni比为0.6的催化剂表现出最高的加氢脱氧活性。在0.3MPa下,乙酸的苯酚脱氧百分数分别为210℃下的99.0%和270℃下的99.9%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号