首页> 外文会议>2010 IEEE Intelligent Vehicles Symposium >Vehicle yaw rate control based on piecewise affine regions
【24h】

Vehicle yaw rate control based on piecewise affine regions

机译:基于分段仿射区域的车辆横摆率控制

获取原文
获取外文期刊封面目录资料

摘要

This paper shows that an active front steering control, that considers the nonlinear behaviour of the tire-road forces, can be designed by parameterizing the vehicle dynamics with respect to the measurable yaw rate and taking into account the steady state behaviour of the vehicle. In order to ensure the tracking of the yaw rate reference signal on the basis of the yaw rate tracking error, despite constant disturbances and parameters uncertainties, the proposed control strategy uses a proportional integral (PI) control, in which the gains depend on the defined parametrized vehicle dynamics. The proposed control system switches depending on the yaw rate as it is a variable measured at low cost. The stability is proved by a piecewise quadratic Lyapunov function using linear matrix inequalities technique. Several simulations, including disturbances rejections and step references, are carried out on a standard nonlinear CarSim D-Class vehicle model to explore the robustness with respect to unmodelled effects such as combined lateral and longitudinal tire forces, pitch, roll and driver dynamics. The simulations confirm that the proposed piecewise linear (PWL) control can greatly improve the vehicle stability and is advantageous in very demanding manoeuvres.
机译:本文表明,可以通过针对可测偏航率参数化车辆动力学并考虑车辆的稳态行为,来设计考虑轮胎-路面力非线性行为的主动前转向控制。为了确保在横摆率跟踪误差的基础上跟踪横摆率参考信号,尽管存在不断的干扰和参数不确定性,所提出的控制策略仍使用比例积分(PI)控制,其中增益取决于所定义的参数化的车辆动力学。所提出的控制系统根据偏航率进行切换,因为它是低成本测量的变量。通过使用线性矩阵不等式技术的分段二次Lyapunov函数证明了稳定性。在标准的非线性CarSim D级车辆模型上进行了包括干扰抑制和阶跃参考在内的多种仿真,以探索针对非模型效应(如组合的横向和纵向轮胎力,俯仰,侧倾和驾驶员动态)的鲁棒性。仿真结果表明,提出的分段线性(PWL)控制可以大大提高车辆的稳定性,并且在要求非常严格的操作中具有优势。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号